I need to make H-bridge diver for DC motor ?

[iugmoh]

I have an 110 VDC motor , and i need to build a h-bridge for this motor if anyone have schematics to build or and suggestion or help


thanks

[aratti]

Using one MSK 4227 200 Volts 20 Amps hbridge already assembled with Individual Logic Level Gate Drive Inputs
should solve your problem.

See datasheet at this link

http://www.mskennedy.com/client_imag...les/4227rc.pdf

Al.

[iugmoh]

thanks alot for your information, it's a powerful chip that give us our needs, but it's availabe and how I can buy it ?

[aratti]

Goto mskennedy site and contact them to check if they sell direct or if they have a distributor near your place.

http://www.mskennedy.com

Al.

[iugmoh]

thanks for replies,
If one can help me to build this H-bridge using Mosfets and transistors ?
I need your help

[mackrackit]

This might help.
see attachment.

[aratti]

I still think that you should use a ready made hbridge but if you want to try to build it yourself, you can use two IR2148 (low/high side driver) to activate the N-chan & P-chan power mosfet.
Read the datasheet to learn how to build the hbridge. You can download it @:
http://www.irf.com/product-info/data...ata/ir2184.pdf

I suggest you to use fuses and start experimenting at low voltage and low current to learn how easily the hbridge can be shorted.

Al.

[mackrackit]

I still think that you should use a ready made hbridge but if you want to try to build it yourself, you can use two IR2148 (low/high side driver) to activate the N-chan & P-chan power mosfet.
Read the datasheet to learn how to build the hbridge. You can download it @:
http://www.irf.com/product-info/data...ata/ir2184.pdf

I suggest you to use fuses and start experimenting at low voltage and low current to learn how easily the hbridge can be shorted.

Al.

iugmoh,
I agree with Al 100%!
The article I posted is only to shoe you how to build a bridge and some of the problems with doing so.