LCD_AnyPin.pbp

[sayzer]

....

And before "You" change anything, ...
"MAKE SURE" you have a backup of the file.
Don't blame me if it gets messed up and you don't have anything to restore it with.
And, I will apologize to MeLabs Support ahead of time for the extra support calls this will generate.

<br>

Darrel,

I appreciate you sharing the code with us; and respect your knowledge. Thank you.

BTW;
Even though you clearly stated it, you will get this question anyway.

Question from an UnKnown user:
Hi Darrel, I tried to apply your "LCD_AnyPin" code into my project. I followed your instructions exactly as you stated. But, it did not work and now my LCDOUT command does not work at all. Can you collaborate me to solve this problem? because I don't see any problem on my side. I think your code is not ready for everyone, yet. Didn't you test it before releasing it?

[Darrel Taylor]

Reply to UnKnown user:

You were warned.
You didn't follow directions.
You Blew It!
Not my problem!

And by the way, there's a copy of the file on the CD you got when you bought PBP.
<br>

[Ioannis]

..... I think your code is not ready for everyone, yet. Didn't you test it before releasing it?

Ohh, come on Sayzer, don't be to pessimistic! 8-)

Ioannis

[Emil G]

Thanks Darrel.

Regards
Emil

[kezuke]

thank you very much!!!

[Josuetas]

This is great stuff no doubt, it should be a suggestion to improve the PBP compiler in the future, i am sure we all had this nibble problem before.

But it is not backwards compatible is it? all of my previous code will be impossible to compile with this change, am i wrong?

Is it impossible to ask for backwards compatibility? Some magic from the magician please ;D.
Being completely ignorant about this: IF LCD_E is not defined then use original LCDOUT command else use DTs version. (Most surely not possible )

An obviuos solution is to have a whole new folder for the PBP modified and one for the original PBP, but in the end it will tend to give trouble, i am almost sure. I know i can handle it but this could be really dangerous code for newbies.

Just my thought

Again, thanks a lot DT


DJC

[Ioannis]

Your answer is on the first post by Darrel explaining that all programs will work as before.

Read it carefully from top to bottom.

Ioannis

[sayzer]

Ohh, come on Sayzer, don't be to pessimistic! 8-)

Ioannis

....
.......
..........

Your answer is on the first post by Darrel explaining that all programs will work as before.

Read it carefully from top to bottom.

Ioannis

...
.....
........


Ioannis, do you see what I meant?