Compare value ...

[louislouis]

Yes. And now it runs OK?

[cobuccit]

Yes. And now it runs OK?

No, I have always used fuses since the first moment I started creating the project.
I'm going crazy for this, I also changed PBP to version 2.47. I don't know what to think anymore.


it is evident that I have a problem, but I cannot attribute to what.


1) PBP compiler, tested with 2 versions 2.60 and 2.47
2) IDE MicroCode, I wouldn't say.
3) Microcontroller (the chip) cannot be, because if I pilot the door with the command PORTB.6 = 1 and PORTB.6 = 0 the relay attacks and disconnects regularly.
4) the BYTE or WORD variables, but I also tried to change the reference value by declaring them both as WORD.
5) The firmware is the same
6) The programmer?

I don't know what to think anymore