I found it on page 240(datasheet) BAUDCON: BAUD Rate Control Register
Bit 4
1 = TX data is inverted
Bit 5
1 = RX data is inverted
Please correct me if I'm doing it wrong...
Baudcon.4 = 1
Baudcon.5 = 1
And make sure your voltages match, so no one gets hurt.
Sorry to ask this...but to make sure. GSM module I/O Interface UART 3.3V Logic 5V Tolerant, connecting to my LABX2 I think is safe even with the modification of BAUDCON...am right?
Bookmarks