Siemens c55 sms control help please

[camolas]

Hi,

I cant put this simple sms sender to work in pic(the phone works pdu mode only on hterminal works all call and sms) . In my code you can see 2 parts 1 is the dailing that works fine the other was to be a sms sender but i cant put it to work can you please helpp me on that thans a lot.

By by

@ Device HS_OSC         ' High Speed Crystal
define OSC 20    
        
Include "modedefs.bas" ' Include serial modes

' Define LCD registers and bits this time not use it for later apps..
Define	LCD_DREG	PORTB           'Lcd D 4-bit parallel register starts at PortB.4 to PortB.7
Define	LCD_DBIT	4              
Define	LCD_RSREG	PORTB
Define	LCD_RSBIT	2
Define	LCD_EREG	PORTB
Define	LCD_EBIT	3
Define  LCD_COMMANDUS   2000	      ' Command Delay (uS)
Define  LCD_DATAUS      50 	     ' Data Delay (uS)
DEFINE  OSC         20                'Define oscilator frequency
DEFINE LCD_LINES 4 'Number lines on LCD 

DEFINE HSER_RCSTA 90h ' Enable serial port & continuous receive
DEFINE HSER_TXSTA 24h ' Enable transmit, BRGH = 1
DEFINE HSER_SPBRG 129 ' 9600 Baud @ 20MHz, 0.16%
DEFINE HSER_CLROERR 1 ' Clear overflow automatically
        
TrisC.5=0
TrisC.6=0
TrisC.7=1
B0 var byte

High portC.5 ' Led flashing to see if wardware are ok
Pause 500
Low portC.5
Pause 500
High portC.5
Pause 500
Low portC.5
Pause 500


HSEROUT ["AT", 13]
HSEROUT ["ATD+351xxxx31210;", 13] 'phone dials to number no problem here
pause 5000   
                                      
' Now were is the problem is when i thange the dialing line command for the sms to send a sms and the phone do nothing.. :(
'HSEROUT ["AT", 13]  
'HSEROUT ["AT+CMGS=16", 13]
'HSEROUT ["079153912601000011000C915391663921010000AA02EF35",13]
STOP
end