Basic regulator design
Hi, Ross
I do not exactly know the 'professionnal level" you want to build your control, but, what exists :
1) the programmable temp regulator ... I used it to control Cast iron heat treatments. costs some $$$ ... but most reliable !!!
2) The "el chapo" device ... have a look to Parallax "industrial applications" booklet ... there's how to realize a simple PID temp regulator ( w/soft offered !!! ) . an AD595 or MAX 6675 will be a good interfacing to Thermocouple.
With Darrel's instant interrupts, il wil be easy to drive the system clock , now.
On this basis, I've realized a vent regulator to control with a R/C servo the cowling apertures for a model plane engine ...
Here, I output the command signal @ 40 Hz ... so it might be much enough for your application !!!
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks