Multiplexer address control..

Results 1 to 18 of 18

Threaded View

  1. - 25th July 2018, 03:46 #16
    Mike, K8LH's Avatar
    Mike, K8LH
    Mike, K8LH is offline Member
    Join Date
    Aug 2005
    Location
    Michigan, USA
    Posts
    224

    Did you find this post helpful? Yes | No

    Default Re: Multiplexer address control..

    I like pedja089's solution which is probably about as simple, efficient, and elegant as you can get with pure PBP code. He might test clearing the four LATB bits and then setting them based on if control.0 = 1 then latb.4 = 1 (or something similar).

    I have to say the code PBP generated for the "Control << 4" instruction was pretty dismal. I'm curious to see what XC8 will generate for that...
    Last edited by Mike, K8LH; - 25th July 2018 at 04:13.
« Previous Thread | Next Thread »

Similar Threads

  1. how to setup 7 digit led multiplexer code for running in background?
    By CuriousOne in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 21st January 2014, 16:10
  2. How do I give a radio control car autonomous control
    By Kenjones1935 in forum General
    Replies: 190
    Last Post: - 17th January 2010, 15:40
  3. Multiplexer channel selection
    By Castor in forum mel PIC BASIC Pro
    Replies: 17
    Last Post: - 19th May 2008, 10:51
  4. Using a MAX7219 (LED digit multiplexer) with a 16F88
    By flotulopex in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 11th March 2007, 21:11

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules