Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

Results 1 to 15 of 15

Threaded View

  1. - 18th November 2017, 23:53 #6
    dbachman's Avatar
    dbachman
    dbachman is offline Junior Member
    Join Date
    Oct 2008
    Posts
    52

    Did you find this post helpful? Yes | No

    Default Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Well that worked fine.....
    Well the board has a crystal hook up but can be strapped in and out.
    I did try just the define osc 32 with my config and it also worked...
    as you probably surmised, I am pretty much a newbie..so why the ocs 32 define and say not 16 or 8?

    By the way thanks a bunch
    Last edited by dbachman; - 18th November 2017 at 23:56.
« Previous Thread | Next Thread »

Similar Threads

  1. Timer1, Interrupts and SLEEP (on 18F45K22) - can't get it to work at all!
    By jimbostlawrence in forum General
    Replies: 3
    Last Post: - 6th November 2011, 19:33
  2. Code that worked with WINDSTAR LCD doesn't work with Newhaven LCD?
    By jellis00 in forum mel PIC BASIC Pro
    Replies: 36
    Last Post: - 14th March 2011, 18:38
  3. [REQ] Reading Dip-switches on 628A PortB - Issue on PortB.3 and PortB.4
    By RCtech in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 12th March 2011, 13:11
  4. LCD Data on portA and portB
    By EDWARD in forum mel PIC BASIC
    Replies: 31
    Last Post: - 22nd July 2005, 14:27
  5. Lcd On Porta And Portb
    By EDWARD in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 5th May 2005, 05:53

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules