I knew it had to be something supidly simple. I have been looking at and trying to understand some of the coding, they all start to look the same to me. Have to see if I can compile it with MPLAB.
THANKS
I knew it had to be something supidly simple. I have been looking at and trying to understand some of the coding, they all start to look the same to me. Have to see if I can compile it with MPLAB.
THANKS
No, you will not be able to compile that program with MPLAB, only with MicroC.
Thanks and Regards;
Gadelhas
Yuppers... just found that out the hard way. About ready to put 1KV thru this PIC and say the hell with it..... NOT
I'll figure something out.
I should have known the simple would be hard
Tried another sample file with MPLAB and actually managed to get it to build and load. But "NO" LCD initialization, still a top row boxes.
Will have to Google the 16f1827 some more and see if someone has Ideas.
Do you have pin 3 of the LCD (contrast) connected to a POT?
Dave
Always wear safety glasses while programming.
Bookmarks