I can not get to the manual as the link is dead. Do you have an other link ?
Ion
try this link:
http://www.melabs.com/downloads/pbpm304.pdf
I think the pdf manuals have been removed by MeLabs, however the html version is on-line here for the PBP version...
http://www.microengineeringlabs.com/...ces/pbpmanual/
and here for the plain vanilla...
http://www.microengineeringlabs.com/...ces/pbcmanual/
Melanie
Thank you Melanie. What is the actual verion of the Pic Basic Pro ?
What is the actual version of PBP, because on the posted link it was mention 5 or something similar, but the version which i bought a week ago it is 2.45 ?!?!
Ion
Hi igeorge,
current version is indeed 2.45. As i read in your pots, you buy it from Reynolds Electronic (rentron.com). Be sure that Bruce will not offers less than the lastest version.
regards
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
I cheked my version by doing an update which returned the message:
You have the latest version, no update available.
Merci beaucoup
Hi igeorge,
you do your check in MicroCode Studio. It doesn't check for the PicBasic Pro version. Only for microCode studio Version.
bienvenu
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
> What is the actual version of PBP, because on the posted link it was mention 5 or something similar
That's the manual Revision I believe which on my last .pdf dowload was 5.02.
This page gives you the current Version History...
http://www.melabs.com/support/upgrade.htm
Do check with the MeLabs website regularly for Updates, Upgrades, downloads, etc etc.
Thank you Melanie,
I got the link and the manual as you sugested.
Do you know where i can get the link for the pdf version ?
Thank you
Ion
Melanie,
I know it is not the place for this post here, but as you will recieve notification on your mail i will ask for help.
On the schematic forum i put a post as:
"Newbie needs help"
I can not make the chip to run in its own, nor i know how to make a chip to use it in a stand alone PCB.
Can you please , have a look and switch on the light in this problem?
Thank you
Ion
P.S. I am just 5 days old with Pics and Flash-Lab.
I just give up with stamps and try to get more from PICs
pdf's seem to have been removed as I mentioned earlier.
Questions regarding why should best be directed to MeLabs.
Hi,
Looking for the 2.60 pdf Manual ???
http://melabs.com/downloads/PBP_Manual_0609_260.pdf
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks