ESP8266 - transfer some bytes PC<>PIC over wifi

[amgen]

hey man,...... YOU DON'T USE AT STUFF........
What you do next is......1) power up 8266... (3 volts)
2) Look at your live WIFI network list for the ESP device and hook up your computer/laptop to that network, I put screen shot-
3) that opens the onboard web page for all the settings and type of access point (you can figure out) or I will share what I did
4) restart the device with your UART TX,RX connected to pic...... open say Hyperterminal connection type TC/IP winsoc
5) connect to your network ..... 192.X...... or 172.XX.......... port 23
6) once connected, you can send and receive at the baud you have set
....... suggestion, program PIC to serout some crap say once/second,...... then when you connect you can tell if shit is working
.
.

.