Hello,
I am experiment with the Linx TXM-418-LC AND RXM-418-LC modules. The manual states they are capable of sending and receiving serial data up to 5000 bits/second. I am using serout serpin,N2400, and serin serpin,N2400. Is this the right baud rate, I am assuming 2400 baud is 2400 bits per second. I am using a 16f628A processor, looking at the datasheet for the 16f628A I would think I would have less errors at 300k using a 4Mhz crystal. Or am I on the wrong track? Thanks