Missing 16F882 family include files :-(


Closed Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2007
    Posts
    5

    Default Missing 16F882 family include files :-(

    I have recently purchased some PIC16F882 MCUs, however now MicroCode Studio cannot use PBP to compile or assemble code for this controller; the 16F882 is not selectable. If anyone has either the files I need or a link to the files, it would be greatly appreciated.

    I believe the files needed are:

    M16F882.INC (or something for the entire family, maybe M16F88X.INC)
    16F882.INC
    16F882.BAS

    Also for the future use of 883 and 886, if anyone could point me in the direction of those files, thatd be great!

    Cameron Abt

  2. #2
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default

    You'll need to upgrade your copy of Picbasic Pro.

    Support for the 16F882 was added in the latest version 2.50

    The 883 and 886 were available in PBP 2.47, so you'll get them too if you upgrade to 2.50.

    See ...
    http://www.melabs.com/support/upgrade.htm#History
    <br>
    DT

Similar Threads

  1. Version Control
    By btaylor in forum mel PIC BASIC Pro
    Replies: 33
    Last Post: - 16th October 2011, 17:12
  2. Continuous Interrupts when using DT_INTS and an INCLUDE file
    By jellis00 in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 15th January 2010, 21:42
  3. Can't seem to add AllDigital to the include files
    By ozarkshermit in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 12th November 2009, 04:21
  4. include files 8k limit
    By skimask in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 16th January 2006, 06:35
  5. Replies: 2
    Last Post: - 13th December 2005, 00:11

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts