Receiving POCSAG with PBP

[Bob Smith]

Hi,

Has anyone written code to decode a POCSAG paging signal? I have a pager and would like to duplicate its call number into a PIC to control things (switch lights on and off etc.).

Any pointers and tips to save me loosing the last of my hair!

Thanks,
Bob Smith

[L_Gaminde]

I have done this using a PC and a scanner, using a small adapter board, I would think it could be done, I have thought about doing it also, but never took it any futher. You will need a radio that you can tap into, using the speaker input will not work.

[L_Gaminde]

This should get you started there is a ton of info out there the second link is an AVR microcontroller project good luck and keep me informed on you progress.


http://www.hackcanada.com/blackcrawl...om/pocsag.html


http://users.rcn.com/carlott/projects.html


http://www.radiocom.co.uk/


http://www.radio101.de/radio101/epocsag.htm


http://www.aaroncake.net/schoolpage/pocsag.htm


http://hem.passagen.se/communication/pocsag.html

[L_Gaminde]

Here is the circuit for Pocsag when not using a soundcard and may work with Pic's

http://www.qsl.net/g4hbt/pogsac.htm

[Bob Smith]

Many thanks for the info.

I did write POCSAG encoder code in xbasic (shows how long ago that was!) for the PC. But with memory fading and age increasing I was checking to see if it had already been done.

Will start on the code soon but it will take me some time to finish (part time hobby).

Thanks,
Bob

[ghyaward]

Bob, did you ever get a decoder running? I'm about to start on the same project and did not want to re-invent the wheel.

[lahloumidi]

I Have Recently DoNE Some REseArch About This Project And Finaly I Find What I Need The Famous Pocsag Decoder Based On A 16c84 Pic R 16f
And I Have Done The Project And It Work Very Good