Rentron Encoder

[Nitrous]

I know this is an old thread, but is there any advantage in using the CIP-8 pair over the PT2262/72 combination?
If I understand these chips correctly, simply setting one of the data lines high will result in the decoder chip data line sinking or sourcing the same data line. Is that correct?

I'm trying to make a multi transmitter single receiver combination that will allow for detection of which transmitter has been activated.

Thanks
Doug

[Ioannis]

They are doing the same thing.

But remember that Bruce (owner of Rentron), is very helpful person, also member of this forum. So, if you need help, I think you would prefer CIP-8.

Ioannis