On my system everything in PICMultiCalc works - except the LCD character generator (which I've never used). It throws the same error as Richard reports.
Do you have FM20.dll on your system Sayzer?
If you do, would you mind posting it (I know it might not be 100% kosher doing so but anyway...)
Or, to Richard, if you have the FM20.dll file on your 32bit system would you mind posting it?
I'm reluctant to download such file from random sites on the internet.
/Henrik.
My 64 bit pc has file in windows\system32 folder but it does not want to know about it ,
might try copying it to syswow64 later , it might load up if registered there
can't upload it to forum it exceeds upload limit
Warning I'm not a teacher
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
Thank you Sayzer for uploading the files. I managed to get it working by basically doing the same things as with MSSTDFMT.dll, namely this:
Copy the files to the SysWow64 folder (again I had to revert to safe mode in order to be able to do this).
Run a command prompt as adminstrator and register the fm20.dll using the 32bit version of regsrv32 (which, sort of conunterintuitively, is the one residing in the SysWow64 folder and not the one in the System32 folder) by executing the command:
%systemroot%\SysWow64\regsvr32 c:\Windows\syswow64\fm20.dll
After doing this the LCD portion of PICMultiCalc seems to work as expected which either means that I already had an registred version of FM20ENU.dll somewhere on my system or it isn't actually needed for some other reason - or there might still be some feature in PICMultiCalc that doesn't work which I have not discovered yet. I'll just leave it alone for now.
/Henrik.
Thank you for the guidance. MSSTDFMT.dll seems to make everything happy again. Registering the .dll was especially helpful.
Once again, the forum to the rescue.
bo
Bookmarks