Hello all
Can anybody explain me how to write a code for to drive a hard disk (IDE) with PICBASIC PRO?
thank's in advance
Hello all
Can anybody explain me how to write a code for to drive a hard disk (IDE) with PICBASIC PRO?
thank's in advance
Ok, here I have a link for controlling IDE harddisk drive with a PIC.
I am just posting the link and the schematic here to provide some ideas for those who are interested.
No comment whatsoever.
<img src="http://img4.picsplace.to/img4/27/ide_000.JPG" alt="Image Hosting by PicsPlace.to" >
Here is the link for full description and software details.
http://hem.passagen.se/communication/ide.html
------------------------------------
Last edited by sayzer; - 5th December 2006 at 19:53.
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
Originally Posted by sayzer
I suppose there's a million different ways to do it, but I did the upper 8 bits 2 different ways, one with stacked 74LS574's with the OE* & Latch pins seperated and once with a 74ABCT2952 (basically a bi-directional 74LS574 with direction-dependant Latch and OE* pins).
But I never thought of using a 4014 for the upper byte. Interesting indeed...
JDG
Bookmarks