Eagle & Tait's Programmer

Closed Thread
Results 1 to 6 of 6
  1. - 16th October 2005, 21:42 #1
    crematory's Avatar
    crematory
    crematory is offline Junior Member
    Join Date
    Jul 2005
    Posts
    65

    Smile Eagle & Tait's Programmer

    Hi

    I need eagle sch and brd design files for tait programmer "Single Layer", if any one is willing to share the files, I really appreciate it...

    Thanks
  2. - 17th October 2005, 01:45 #2
    Mike_Lynch's Avatar
    Mike_Lynch
    Mike_Lynch is offline Junior Member
    Join Date
    Apr 2005
    Posts
    32

    Did you find this post helpful? Yes | No

    Default

    I don't have a "TAIT Programmer" right off, but if you can use the El Cheapo PICmicro Programmer from Myke Predko
    (see http://www.myke.com/elcheapo.htm ) then I have the schematic and board files in Eagle and you are welcome to copy. As it stands the board is 2 inch x 3 inch single sided, I added a 10 PIN HEADER for "OFF BOARD ICSP" and the board has an isolated flood fill (not a GROUND PLANE) to eliminate excess etching, everything is in 20 mil trace width. Attached is a small image file of the board, take a look and let me know if you want the Eagle files.

    Mike L.
    Attached Images Attached Images  
    Last edited by Mike_Lynch; - 17th October 2005 at 01:57.
  3. - 17th October 2005, 18:03 #3
    crematory's Avatar
    crematory
    crematory is offline Junior Member
    Join Date
    Jul 2005
    Posts
    65

    Did you find this post helpful? Yes | No

    Smile

    Hi Mike_Lynch

    Thanks for the offer...I found some one who made this already, but the guy added some improvements too, so I downloaded the files, and made the PCB look much better and well organised...If some one can iprove it further, suggestions will be welcome...

    Can you upload your eagle files too, they look nice in deed
    Attached Files Attached Files
    Last edited by crematory; - 17th October 2005 at 18:05.
  4. - 19th October 2005, 00:55 #4
    Mike_Lynch's Avatar
    Mike_Lynch
    Mike_Lynch is offline Junior Member
    Join Date
    Apr 2005
    Posts
    32

    Did you find this post helpful? Yes | No

    Default

    crematory
    Yes what you found looks very NICE. Is there a site available with information
    available on that design?

    Attached is El Cheapo.zip containing files for the board that I posted the image of. Zip Contains Eagle *.sch & *.brd files as well as PDF of the copper and GIF of parts placement for those who wish to build a board but do not have EAGLE. The PDF file may be used for Toner Transfer or to make transparancy for photoetch board.

    File excedes the size restrictions will break down please hold. . . .

    OK now it should work
    El Cheapo-1.zip and
    El Cheapo-2.zip
    Attached Files Attached Files
    Last edited by Mike_Lynch; - 19th October 2005 at 01:05.
  5. - 19th October 2005, 18:28 #5
    crematory's Avatar
    crematory
    crematory is offline Junior Member
    Join Date
    Jul 2005
    Posts
    65

    Did you find this post helpful? Yes | No

    Thumbs up

    Hi

    The site is in dutch language, I had to translate to unerstand what the guy was talking about, I found it by coincidence when I wrote PIC Brenner in dutch !!


    http://www.sprut.de/electronic/pic/brenner/

    If any one can translate what really was saying, that will be really cool, cuz there are lots of stuff there in deed...

    Thanks
  6. - 20th October 2005, 17:32 #6
    bbarney's Avatar
    bbarney
    bbarney is offline Member
    Join Date
    Nov 2004
    Posts
    107

    Did you find this post helpful? Yes | No

    Default

    go here and it's german
    http://world.altavista.com/
« Previous Thread | Next Thread »

Similar Threads

  1. Melabs U2 Programmer Command Line Options
    By Robert Wells in forum General
    Replies: 5
    Last Post: - 3rd July 2009, 02:11
  2. problems with USB programmer
    By malc-c in forum General
    Replies: 7
    Last Post: - 10th May 2007, 20:14
  3. USB programmer problems
    By uiucee2003 in forum USB
    Replies: 2
    Last Post: - 15th August 2006, 23:47
  4. Melabs USB Programmer
    By tmurph in forum General
    Replies: 1
    Last Post: - 25th December 2005, 03:25
  5. General Programmer Questions
    By mslaney in forum General
    Replies: 1
    Last Post: - 17th December 2004, 18:16

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules