MicroCode Studio and Microchip ICD3 Parameters

[geoffpeters]

Hello,

How do I configure the parameters for a Microchip ICD3 programmer? I installed using the icd3cmd.exe programmer filename. When I click compile & program the program compiles successfully but there is no indication that the programmer is actually running.

Any help appreciated

[tumbleweed]

Have you setup the commandline options for icd3cmd? They can be found in the MPLABX folder docs\Readme for RealICECMD_ICD3CMD.htm

See http://www.picbasic.co.uk/forum/showthread.php?t=23910 for some basic setup info

[geoffpeters]

No I haven't entered any command line options. That is what I'm lookin for. I had previously read the information in the link you provided but it only suggests parameters for the PK3.

I looked at the readme for the ICD3 in the MPLABX docs but I do not see the options explained.

I also looked at MPLAB ICD 3 In-Circuit Debugger User's Guide for MPLAB X IDE but still do not see the command line options.

Clearly I'm missing something...

[tumbleweed]

Did you look in the file "Readme for RealICECMD_ICD3CMD.htm", sections 8 (command line options) and 11 (examples)?

They're all pretty similar...

[geoffpeters]

OK, that is what I've been looking for. I'll try some of those and see how it goes. The information is a bit difficult to find so thanks for your help!

[geoffpeters]

Well, no joy here.

I have the ICD3 connected to the target 12F1612. The target is powered and the power LED on the ICD3 illuminates.

When I compile and program, the file compiles successfully, a blank black DOS window opens with no text and then closes.

The device appears to not be programmed.

I'd really like to make this work.

Does anyone have any suggestions on how to use MCS with the ICD3?