Hello gentlemen, im new to the forum and dont really know much about usb or PBP3 so sorry for the may-be dumb question since i use HITECH-C
i did all off the dummies guide stuff but in the end, it asks me to compile, compile where? in MPLAB?
ok so i compiled on mplab using the PBP3 compiler on the 15 trial version and it gives me the following:
Executing: "C:\Program Files (x86)\PBP3\PBPX.EXE" -ampasmwin -k# -p18F2550 "C:\Users\Aramburo\Desktop\Nueva carpeta\HUB.pbp"
PICBASIC PRO(TM) Compiler 3.0.7.1, (c) 1998, 2013 microEngineering Labs, Inc.
All Rights Reserved.
Trial version. 15 days left.
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 761 : Symbol not previously defined (USBDeviceInit)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 762 : Symbol not previously defined (USBDeviceInit)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 761 : Symbol not previously defined (USBDeviceTasks)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 762 : Symbol not previously defined (USBDeviceTasks)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 761 : Symbol not previously defined (GetUSB)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 762 : Symbol not previously defined (GetUSB)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 761 : Symbol not previously defined (USBDeviceTasks)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 762 : Symbol not previously defined (USBDeviceTasks)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 761 : Symbol not previously defined (PutUSB)
Error[113] C:\PROGRAM FILES (X86)\PBP3\PBPPIC18.LIB 762 : Symbol not previously defined (PutUSB)
Halting build on first failure as requested.
BUILD FAILED: Tue Apr 22 22:54:59 2014
apart from this, i would really like to know where do i configure my PIC18f2550??
do i make a .c file?? (i.e MY_JOYSTICK.c)
and work from there??
how do i prevent/correct this compile errors??
also, where can i find the circuit diagram for this "dummie" joystick, thanks a bunch guys and see you later
i posted the same thing on another thread, but i am new to the forum and dont know if that was the appropriate way. let me know. thanks
Bookmarks