18F4550 running 3.3V (serin2) and 16F877 running 5v (serout2), is possible?

Results 1 to 9 of 9

Threaded View

  1. - 25th January 2014, 18:32 #1
    Pimentel's Avatar
    Pimentel
    Pimentel is offline Junior Member
    Join Date
    Dec 2006
    Location
    Brasil, Sao Paulo, Campinas
    Posts
    54

    Default 18F4550 running 3.3V (serin2) and 16F877 running 5v (serout2), is possible?

    Hello all,

    Somebody knows solve it? I have a circuit based on 18f4550 as RX (serin2) using 3,3v as power, and other circuit using 18f877a running 5,0V. I puted a 1k resistor of the TX to the RX pins but sometimes the data fail. I thinnk that is necessary to use some converter. I alread put a divider resistor (15k and 10k without sucess.

    Pimentel
    Last edited by Pimentel; - 25th January 2014 at 18:35.
« Previous Thread | Next Thread »

Similar Threads

  1. 18f4550 running slow?
    By Giulio in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 22nd October 2012, 21:28
  2. 18f4550 running slow?
    By Giulio in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 14th October 2012, 22:48
  3. 18F4550 not running
    By comwarrior in forum General
    Replies: 6
    Last Post: - 1st January 2011, 01:07
  4. running of page warning and error 16f877
    By earltyso in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 7th November 2007, 01:05

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules