I have not programmed a pic for several years.
I want to use a 18F46J11 and I want to use the
on chip RTCC as a free running 1 sec timer
with the RB1 port giving me every sec an output
(0.5s on 0.5s off). This is from the spec sheets.
In my design I have a 32.768 kHz crystal on the
Timer1 external clock input Pin RC0/RC1.
How do I initiate the timer in PBP?
Any help is greatly appreciated, however my
feedback how things worked out will have to
wait a bit since I am currently laying out the pcb
and I have to know if I have to make changes
to my design.

Thank you for your help

Gerd