Hello everyone,
I'm trying to build an application that will simply trigger relays using sms on GSM module.
What I have done so far (basically)..
1. Get GSM signal and manufacturer
2. Send sms
Now I'm trying to read incoming messages but with interrupt (with DT's). but it seems that when I send a message to the GSM the following block of code does not function
Code:
Getbytes:  
  HSEROUT ["Went here!!",13]
  i=i+1  ' coubt how many time it pass here
  cntr = 0
       While RCIF = 1     ' clear the buffer
       HSERIN 50,error,[Wait("P")] ' test it
       Hserout ["Got it!!",13]
       Wend
@INT_return
The following code is what I'm testing...I strip out the other codes within the main loop just to simply...
Code:
'****************************************************************
'*  Name    : HACS.BAS                                      *
'*  Author  : [select VIEW...EDITOR OPTIONS]                    *
'*  Notice  : Copyright (c) 2012 [select VIEW...EDITOR OPTIONS] *
'*          : All Rights Reserved                               *
'*  Date    : 10/20/2012                                        *
'*  Version : 1.0                                               *
'*  Notes   :                                                   *
'*          :                                                   *
'****************************************************************
asm
    __CONFIG    _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    __CONFIG    _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    ;__CONFIG    _CONFIG2L, _PWRT_ON_2L & _BOR_ON_2L  & _BORV_2_2L  & _VREGEN_ON_2L   
    __CONFIG    _CONFIG2H, _WDT_OFF_2H 
    __CONFIG    _CONFIG3H, _MCLRE_ON_3H & _LPT1OSC_OFF_3H & _PBADEN_OFF_3H & _CCP2MX_ON_3H 
    __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _ICPRT_OFF_4L  & _XINST_OFF_4L & _DEBUG_OFF_4L 
endasm
INCLUDE "MODEDEFS.BAS"       ' Include Shiftin/out modes
INCLUDE "DT_INTS-18.bas"     ' Base Interrupt System
INCLUDE "ReEnterPBP-18.bas"  ' Include if using PBP interrupts
; create the transmition interrupt
        '((((((((((((((((((((((((((((((((((((((()))))))))))))))))))))))))))))))))))))))
ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler   RX_INT,    _Getbytes,    PBP,  no
    endm
    INT_CREATE               ; Creates the interrupt processor
ENDASM
;


;------------------------------------------------------------------------

DEFINE LCD_DREG PORTB
DEFINE LCD_DBIT 0
DEFINE LCD_EREG PORTB
DEFINE LCD_EBIT 5
DEFINE LCD_RSREG PORTB
DEFINE LCD_RSBIT 4
DEFINE LCD_BITS 4
DEFINE LCD_LINES 2
DEFINE LCD_COMMANDUS 2000
DEFINE LCD_DATAUS 50


define OSC 48
TRISA = %00001111  
PortA = %00000000 
TRISC  = %10000000    ' PORTC.7 is the RX input, PORTC.6 is the TX output 
ADCON1 = %00001111
TRISD  = %00000111 
PortD =  %00000000
PORTD = %00000000               ; set to PORTD low
LedA var PortD.0                ;assign var LedA to PortD.0
LedB var PortD.1                ;assign var LedB to PortD.1
LedC var PortD.2                ;assign var LedC to PortD.2
Load1 var PortD.3
Load2 var PortD.4
Load3 var PortD.5
'CONFIGURE DISPLAY 
pause 100
ln1 con $80
ln2 con $C0

DEFINE HSER_RCSTA 90h ' Enable serial port & continuous receive
DEFINE HSER_TXSTA 20h ' Enable transmit, BRGH = 1
DEFINE HSER_BAUD 9600
DEFINE HSER_CLROERR 1 ' Clear overflow automatically
; setup serial port line for transmition       
RCIF       VAR     PIR1.5     ' Receive  interrupt flag (1=full , 0=empty)
TXIF       VAR     PIR1.4     ' Transmit interrupt flag (1=empty, 0=full)
'------------------------------------------------------Transmition-------------
But0 var PortA.0
But1 var PortA.1
But2 var PortA.2
But3 var PortA.3

Led1 var PortC.0
Led2 var PortC.1
Led3 var PortC.2
Led1 = 0
Led2 = 0
Led3 = 0
flag1 var bit
flag1 = 0
flag2 var bit
flag2 = 0
flag3 var bit
flag3 = 0
Pswd var byte[5]
Data @0, 5,"12345"
ArrayNum var byte[12]
'------------------------------------------------------------------------------
cntr var byte  'count error occur   
cntr = 0 
i  var byte
i = 0
PortB = %00000000   
SerialData var byte[10]
LCDOUT $Fe,1
'-------------------------------------------------------------- 
pause 1000
LCDOUT $Fe,ln2 , "System loading.."
pause 5000
Gosub ButtOption1
;----Initialize text mode--------
HSEROUT ["AT+CMGF=",49,13,10]   
HSERIN 5000, GSM_CHECK_ERR, [WAIT("OK")]
LCDOUT $Fe,1 , "HASMS-CMS"
pause 1000
LCDOUT $Fe,192, "Init Text MODE"
pause 1000
LCDOUT $Fe,ln2, "                " ' clear second line 
Lcdout $FE, ln2,"system ready..."
cntr = 0 
PAUSE 2000
LCDOUT $Fe,ln2, "                " ' clear second line
@   INT_ENABLE  RX_INT     ; enable RX_INT interrupts

 
'--------------Main program start here--------------
Main
LCDOUT $Fe, ln1, "HASMS-CMS", Dec3 i 
LCDOUT $Fe,ln2 , "Listening...", DEC3 cntr 
if cntr < 254  then
cntr = cntr + 1
else
cntr = 0
Endif 
pause 2000  
 
GOTO Main
'--------------Main program end here--------------
GSM_CHECK_ERR:
    cntr = cntr + 1
    LCDOUT $Fe, ln1, "HASMS-CMS" 
    pause 1000
    LCDOUT $Fe, ln2, "GSM Error   #", DEC3 cntr
pause 1000
return
    
    
 Getbytes:  
  HSEROUT ["Went here",13]
  i=i+1  ' count how many time it pass here
  cntr = 0
       While RCIF = 1     ' clear the buffer
       HSERIN 50,error,[Wait("P")] 'test it
       Hserout ["Got it!!",13]
       Wend

@INT_return

 error:
      Hserout ["Error",13]
goto Main


ButtOption1:
    LCDOUT $Fe,1 , "GSM Info"
    LCDOUT $Fe, ln2, "processing... "
    pause 1200
    High PortD.4
    pause 1200
    Low PortD.4
    
    '------------------- Determine Signal
    HSEROUT ["AT+CSQ",13,10]   
    HSERIN 1000, GSM_CHECK_ERR, [WAIT("+CSQ: "),STR Serialdata\4]
    LCDOUT $Fe,1 , "GSM Info"
    LCDOUT $Fe,ln2, "SIGNAL:",STR Serialdata\4  
    cntr = 0 
    '------------------- Determine Manufacturer
    PAUSE 3000
    HSEROUT ["AT+CGMI",13,10]                           'Ask model name                                                                    
    HSERIN 5000, GSM_CHECK_ERR, [WAIT("SIMCOM"),STR Serialdata\4]
    LCDOUT $Fe,1 , "GSM Info"
    LCDOUT $Fe,ln2, "MANUF:SIMCOM",STR Serialdata\4  
    cntr = 0 
    pause 3000
    LCDOUT $Fe,1    ' Clear LCD
    return

END
I think the GetBytes sub program triggers on boot up because it displays Hserout ["Went here",13]...after that when it enters to the main loop and try to send sms to the device it never get the interrupt.
Can anyone spot what I'm missing? I've been going nuts with it the whole week

Regards,
tacbanon