port handle

[kumara]

dear
i want to write something like this
go_sub1:
go_sub2:
go_sub3:

go_sub1:
high porta.0
goto main

go_sub2:
high portb.1
goto main

go_sub3:
high portb.2
goto main

my pboblem is program goto first go_sub0: then high portb.0 then program goto go_sub1: then high portb.1 but low portb.0.
please write me example for this i want to do portb.0 stay on high with second step.
thank you

[mackrackit]

go_sub1:
high porta.0
goto main

But you are using PORTA in your code.
Post your actual code and we will see what can be done.

[kumara]

dear sir
i have some mistake
iwant to handle portA

go_sub1:
go_sub2:
go_sub3:

go_sub1:
high porta.0
goto main

go_sub2:
high porta.1
goto main

go_sub3:
high porta.2
goto main

[rmteo]

When performing bit write operations on PIC16s, this is something you have to watch out for.

Reading the PORTx register reads the status of the pins, whereas writing to it will write to the PORT latch. All write operations are read-modify-write operations. Therefore, a write to a port implies that the port pins are read, this value is modified and then written to the PORT data latch.

[mackrackit]

Many chips have analog funtions on PORTA, did you turn the ADC off?
http://www.picbasic.co.uk/forum/showthread.php?t=561

[kumara]

use 16f877a
Adc off
can u help me.with example
thank you