Problems Using Debug to select saved screens in a TRM-425 serial display

[Roddy Wayne]

Hi All,

I'm having problems selecting Saved Screens in a TRM-425 display. I'm using PBP and
everything is Compiling and programming properly. I'm pretty new at this, and any help
you can be will be greatly appreciated. I can see the serial data going into the TRM-425
serial input pin on the display with a scope but, only Screen 0 (Zero) is being displayed.
The display never changes.

Thanks Again!

Here's the code I'm attempting to use:

'************************************************* ***************
'* Name : UNTITLED.BAS *
'* Author : [select VIEW...EDITOR OPTIONS] *
'* Notice : Copyright (c) 2012 [select VIEW...EDITOR OPTIONS] *
'* : All Rights Reserved *
'* Date : 5/2/2012 *
'* Version : 1.0 *
'* Notes : *
'* : *
'************************************************* ***************
CLEAR ;always start with clear
DEFINE OSC 4 ;define oscillator speed
DEFINE ADC_BITS 8 ; Sets number of bits in result
DEFINE ADC_CLOCK 3 ; Sets clock source (3=rc)
DEFINE ADC_SAMPLEUS 50 ; Sets sampling time in uS
define DEBUG_REG PORTC
DEFINE DEBUG_BIT 6
define DEBUG_BAUD 9600
DEFINE DEBUG_MODE 0
DEFINE DEBUG_PACING 1000
Low PORTE.2 ;makes low for write only
TRISA = %00001111 ;sets 0, 1, 2, and 3 as porta inputs (A to D's & ref's)
TRISB = %00111111 ;sets bits 6 & 7 portb pins as outputs, 0 thru 5 as inputs
TRISC = %10111111 ;sets port c.6 for serial output
TRISD = %00000011 ;sets PORTD 0,1, lines to inputs, rest to outputs
TRISE = %00000000 ;sets all PORTE lines to outputs

Start:

Debug 12, 27, 69, 0, 32 'Mine's Screen
pause 2000
Debug 12, 27, 69, 1, 32 '100% Screen
Pause 1000
Debug 12, 27, 69, 2, 32 '95% Screen
Pause 1000
Debug 12, 27, 69, 3, 32 '90% Screen
Pause 1000
Debug 12, 27, 69, 4, 32 '85% Screen
Pause 1000
Debug 12, 27, 69, 5, 32 '80% Screen
pause 1000
Debug 12, 27, 69, "6", 32 '75
Pause 1000
Debug 12, 27, 69, "7" '70
Pause 1000
Debug 12, 27, 69, "8" '65
Pause 1000
Debug 12, 27, 69, "9" '60
Pause 1000
Debug 12, 27, 69, "10" '55
pause 1000
Debug 12, 27, 69, "11" '50
Pause 1000
Debug 12, 27, 69, "12" '45
Pause 1000
Debug 12, 27, 69, "13" '40
Pause 1000
Debug 12, 27, 69, "14" '35
Pause 1000
Debug 12, 27, 69, "15" '30
pause 1000
Debug 12, 27, 69, "16" '25
Pause 1000
Debug 12, 27, 69, "17" '20
Pause 1000
Debug 12, 27, 69, "18" '15
Pause 1000
Debug 12, 27, 69, "19" '10
Pause 1000
debug 12, 27, 69, "20" '5

Goto Start

End

[Roddy Wayne]

Problem has been solved!

[mdaweb]

Ok, but what was the solution??