Hi,
I try to setup PICKIT3, MPLAB X, PBP3(demo) and it works...
Then I try DT-Int hello world program and when I compile code with this line:
@ INT_ENABLE INT0_INT
result is:
Code:
make -f nbproject/Makefile-default.mk SUBPROJECTS= .build-conf
make[1]: Entering directory `D:/projects/Test 1/mplab/Test.X'
make  -f nbproject/Makefile-default.mk dist/default/production/Test.X.production.hex
make[2]: Entering directory `D:/projects/Test 1/mplab/Test.X'
gnumkdir -p build/default/production
"C:\PBP3\pbpx.exe"  -ampasmx -n -c -k# -v -os -p18lf46k80 TestPBP.pbp
PICBASIC PRO(TM) Compiler 3.0.4.1, (c) 1998, 2011 microEngineering Labs, Inc.
All Rights Reserved.
Pass 1:
C:\PBP3\DEVICES\PIC18LF46K80.PBPINC (556) MSG: LONG Variables enabled (PBPL used)
Pass 2:
Code Gen:
Macro Pass:
mpasmx /o- /s "D:\projects\Test 1\mplab\Test.X\TestPBP.ASM"
COFF Pass:
gnumkdir -p dist/default/production
cp  TestPBP.HEX dist/default/production/Test.X.production.hex
cp  TestPBP.COF dist/default/production/Test.X.production.cof
rm -f  TestPBP.COF
make[2]: Leaving directory `D:/projects/Test 1/mplab/Test.X'
make[1]: Leaving directory `D:/projects/Test 1/mplab/Test.X'
If I comment that line then it is ok..
Code:
BUILD SUCCESSFUL (total time: 4s)
Loading D:/projects/Test 1/mplab/Test.X/dist/default/production/Test.X.production.hex...
Loading D:/projects/Test 1/mplab/Test.X/dist/default/production/Test.X.production.cof...
Loading completed