Hi,
A nice ( free ! ) project to plot DATA transmitted by your RS232 port ...
http://code.google.com/p/serialchart/
Alain
Hi,
A nice ( free ! ) project to plot DATA transmitted by your RS232 port ...
http://code.google.com/p/serialchart/
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Hi Alain,
That looks like a nifty tool. I must be stupid though because I can't seem to find how to actually download the application. I find the source files but they aren't in PBP so I have no use for them ;-)
Can you point me in the right direction?
/Henrik.
Hi, Henrik
looks once you've created and saved your config file ( one shown as an exemple ) within serialchart ...
This is an exemple to paste into the config window ... and save !!!Code:[_setup_] port=COM2 baudrate=57600 width=1000 height=201 background_color = white grid_h_origin = 100 grid_h_step = 10 grid_h_color = #EEE grid_h_origin_color = #CCC grid_v_origin = 0 grid_v_step = 10 grid_v_color = #EEE grid_v_origin_color = transparent [_default_] min=-1 max=1 [interval] color=transparent min=0 max=100000 [RwAcc] color=blue [RwEst] color=red [RwGyro] color=transparent [GyroRate] color=transparent min=-10 max=10 [an3] color=transparent min=0 max=1023
you just launch it ... ( The green arrow ...)
The Pic program only sends data through the serial port, so ... I think you do not need a tutorial for some " debug " or " serout " PBP command.
Regards
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
It took me about half an hour to find it. I still don't see a place to download it from google, where one would think the software would be..... But it looks to be a good find. Thanks Alain!
Here it is to save someone else the trouble. Unfortunately too big to post the zip on our forum.
http://www.starlino.com/data/imu_kal...alChart_01.zip
and configuration file info:
http://code.google.com/p/serialchart...tionFileSyntax
http://www.scalerobotics.com
Alain,
Thanks, I get that, no problem but before I can enter the cofiguration information and hit the green arrow I need to actually download and install the application - and that is what I'm having problem with. I couldn't find where to actually download the thing.
scalerobotics,
Thank you, I'll grab it from there!
Bookmarks