no mod needed ...
Hi, Sebastien
IF you intend to use PBP ... I would recommend you to simply enable the HSPLL mode ( 4x Xtal frequ. ) ... in the Chip CONFIG lines.
You just will have to declare 24 Mhz as a clock frequency ( DEFINE OSC 24 ) ...
the only backdraw will be for " slow PWM " generation ... 1465 Hz will be a minimum ! and some little limitations with the Pulsin, RCTime ...not frequency compensated command.
No need to modify your card, then ... if 6 Mhz is not in use for another chip on the card !!!
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Bookmarks