i need source cod for pic 18f2455


Closed Thread
Results 1 to 9 of 9
  1. #1
    nodey1771's Avatar
    nodey1771 Guest

    Default i need source cod for pic 18f2455

    مرحبا
    برعاية للانضمام الى منتدى عظيم
    فافا هذه الوظيفة بالنسبة لي وأتمنى أن تساعدني
    تحقق مع وزارة أعطال السيارات obd2
    و vrlih الموافقة المسبقة عن علم 18f2455
    ولست بحاجة لهذا الكود حتى استطيع تشغيل اختيار المحاكمة
    [IMG] [رابط] http://www.7mmlbs.com/img/biL39154.png [/ رابط] [/ IMG]
    [IMG] [رابط] http://www.7mmlbs.com/img/TaJ39154.png [/ رابط] [/ IMG]
    [IMG] [رابط] http://www.7mmlbs.com/img/DQd39154.png [/ رابط] [/ IMG]

  2. #2
    malc-c's Avatar
    malc-c Guest


    Did you find this post helpful? Yes | No

    Default

    I don't wish to offend, nor get dragged into a discussion on anti-racial tactics etc, but it would help if you posted in Engilsh.

    Here's a post from one of the forum administrators that which hopefully explains why

    Quote Originally Posted by Melanie View Post
    Whilst there is no objection posting in any language, after Chinese Mandarin (which is a little difficult replicating in ASCII), English is probably the most commonly spoken language on the planet. So much so, that in many avenues, English is mandatory (eg International Air Traffic Control). Want to be a pilot? Then speak English, otherwise you're limited to domestic-only flights. Even French pilots begrudgingly speak English!

    Now for the forum. MeLabs PICBasic on whose products this forum is based, is produced by English speaking people from an English speaking country. The forum is run and owned by English speaking people in a different English speaking country. The Administrators of this forum are English speaking. The majority of members have English as a language, perhaps not their primary language, but at least it is one of them. If this was a Turkish owned or operated forum you could have an argument for allowing totally native language postings.

    As Administrators of this forum we have a dilema, do we allow a foreign language posting in the knowledge it could contain offensive or illegal material which could bring the forum generally into disrepute or indeed have it closed-down, or do we allow it?

    You will argue that there are a few Turkish speaking members. But if it did contain offensive language, how many of you would immediately have reported it for removal? What if the offensive message was posted in native Nepalese, Swahili or even Navajo? How many members do we have that speak those languages? To err on the side of caution, the tendancy is to DELETE postings that cannot be positively identified as safe.

    On the other hand if somebody asked for help in Melanesian or Dinka could you help them? Could anybody? If they were offensive postings, who would know?

    A lot of English speaking people on this forum DO already speak another language (not nescessarilly Turkish). But there is one common international language for communication - and this is an international forum. Unfortunately, like it or not, that commonality is the English language - after all, even computer BASIC is a sub-dialect of ENGLISH.
    From the images that looks like a commercial project, and as such this forum could not discuss the distribution of such code if it exists. Also this forum is about writing code in BASIC (mel picBASIC to be exact).

  3. #3
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,615


    Did you find this post helpful? Yes | No

    Talking

    Hi, Malc

    Got it !!! ... just need to read text ...

    The beta version of firmware is available for download but the final one only comes with the kit.
    http://www.obddiag.net/allpro.html

    Alain
    Last edited by Acetronics2; - 19th March 2010 at 20:28.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************

  4. #4
    malc-c's Avatar
    malc-c Guest


    Did you find this post helpful? Yes | No

    Default

    basically an engine management system reader.. nice project, and nice bit of googling...

  5. #5
    malc-c's Avatar
    malc-c Guest


    Did you find this post helpful? Yes | No

    Default

    To the original poster - Pay your $35 and get the kit !

  6. #6


    Did you find this post helpful? Yes | No

    Default It says...

    Come on guys - you don't read Arabic?

    "Hello
    Care to join a great forum
    Fava this post for me and I hope that helps me
    Check with the Ministry of crashes cars obd2
    And vrlih PIC 18f2455
    I do not need this code so I can run the selection of trial"

    or close enough for folk music...

    Gotta' love Google Tools...

  7. #7
    Join Date
    Jul 2003
    Posts
    2,405


    Did you find this post helpful? Yes | No

    Default

    Check with the Ministry of crashes cars obd2
    So, we're talking about a project here that deals with Toyota obd2..?
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com

  8. #8
    malc-c's Avatar
    malc-c Guest


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by Bruce View Post
    So, we're talking about a project here that deals with Toyota obd2..?
    LOL

    Yeah, it tells you your accelerator was stuck after you crashed !

  9. #9
    malc-c's Avatar
    malc-c Guest


    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by mtripoli View Post
    Come on guys - you don't read Arabic? .
    Could be Klingon for all I know

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts