Serin2

Closed Thread
Results 1 to 2 of 2

Thread: Serin2

  1. - 5th February 2010, 01:54 #1
    mel4853's Avatar
    mel4853
    mel4853 is offline Junior Member
    Join Date
    Jun 2006
    Posts
    60

    Default Serin2

    Can I use serin2 on MCLR pin set up as a I/0 pin? Using a 12F683 with MCLR off.
  2. - 5th February 2010, 03:28 #2
    Kamikaze47's Avatar
    Kamikaze47
    Kamikaze47 is offline Senior Member
    Join Date
    Nov 2005
    Location
    Perth, Australia
    Posts
    429

    Did you find this post helpful? Yes | No

    Default

    Should be fine as long as you configure the pin as an I/O pin.

    The weak pull up on that pin is disabled when you configure it as I/O, so depending on how the device sending the signal is set up, you may need to use a pull up resistor.
    "I think fish is nice, but then I think that rain is wet, so who am I to judge?" - Douglas Adams
« Previous Thread | Next Thread »

Similar Threads

  1. GPS $GPRMC to PIC16F684. Need help with SERIN2
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 27th November 2009, 09:47
  2. Getting SERIN2 to work?
    By BobPigford in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 22nd July 2009, 20:10
  3. SLOW Serin2 and Serout2
    By dragons_fire in forum General
    Replies: 3
    Last Post: - 26th June 2009, 02:38
  4. SERIN2 digit parsing
    By skimask in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 7th January 2007, 23:15
  5. SEROUT2 and SERIN2 commands
    By bangunprayogi in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 4th August 2005, 09:03

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules