My USART problems..

[Glenn]

I'm building a thing that really could use some serial out and input, so I decided to try to finally use the USART's in some pics..

First I tried to get it to work in my nearly-finished testrig for the rest of the stuff, but when this didnt work I built a "serial testring" to be able to sort out the problems.

But no. get nothing in my term program.

This is my testcode..

' Serial testrig 1.0 Glenn a t repulsiv.se

@ device PIC16F877A,HS_OSC,LVP_OFF,WDT_OFF,PROTECT_OFF

' Lets define..

DEFINE OSC 20	' Lets work at 20MHz

' And the LCD..
	DEFINE LCD_DREG	PORTD				' Set LCD Data port
	DEFINE LCD_DBIT	0						' Set starting Data bit (0 or 4) if 4-bit bus
	DEFINE LCD_RSREG	PORTD			' Set LCD Register Select port
	DEFINE LCD_RSBIT	4					' Set LCD Register Select bit
	DEFINE LCD_EREG	PORTD				' Set LCD Enable port
	DEFINE LCD_EBIT	5						' Set LCD Enable bit
	DEFINE LCD_BITS	4						' Set LCD bus size (4 or 8 bits)
	DEFINE LCD_LINES	2					' Set number of lines on LCD
	DEFINE LCD_COMMANDUS	2000	' Set command delay time in us
	DEFINE LCD_DATAUS	50				' Set data delay time in us

' And the serial port using USART.
	DEFINE HSER_BAUD 9600   ' HSER baud rate
	DEFINE HSER_SPBRG 129   ' HSER SPBRG init
	DEFINE HSER_RCSTA 90h   ' HSER receive status init
	'DEFINE HSER_TXSTA 24h   ' HSER transmit status init high speed
	DEFINE HSER_TXSTA 20h   ' HSER transmitter init


pause 1000	' Gracetime for the LCD

Main:
	LCDOUT $FE, 1, "Hello world"
	pause 500
	LCDOUT $FE, $C0, "Again and again"
	pause  500
	LCDOUT $FE, 1
	pause 500
	gosub serial
	pause 500
	goto main:
	
serial:
	HSEROUT ["Glenn",10]
	Return

..I tried different things, but this should work ? or ?

I attached a schematics of my simple testrig.

[Glenn]

Hrrm, yes, I can see that I forgot two things in the schematics, first of all the MAX233 have a 1uF cap close to its Vcc and gnd, and I also put a swicth that change the position of RX/TX coz you never know what you connect it to.

I set my terminal program to 9600bps 8N1, no flowcontrol.

[mackrackit]

Looks like pins 2 and 3 on the DB9 backwards?

[mackrackit]

I did not see the part about the tx/rx switch.

Do you have a copy of Pic Multicalc?
http://www.picbasic.co.uk/forum/show...24&postcount=4

[Glenn]

Yea, since I use a cable that is crossed I connected it that way, but later I added the switch that change the positions, mainly coz I wasnt really sure how it should be

Yea, I have picmulticalc, but I didnt really thought of that it had USART help.

And yes..

I choosed 20Mhz 9600bps and copied the defines to my code (replacing the old ones), and voila, it worked.

Niice.

But I still dont undersstand why it didnt work before ?

..This was the defines picmulticalc gave me:

DEFINE HSER_RCSTA 90h ' Enable serial port & continuous receive
DEFINE HSER_TXSTA 24h ' Enable transmit, BRGH = 1
DEFINE HSER_SPBRG 129 ' 9600 Baud @ 20MHz, 0,16%
DEFINE HSER_CLROERR 1 ' Clear overflow automatically

[mackrackit]

I have never tried DEFINE_BAUD
maybe that was the problem.

[Glenn]

Hmm, now I have problem with reading from the USART instead..

I searched the forum and found ALOT of threads, but none that really solved my prob..

I want to read a string of chars, like 16, BUT if a CR (13) occurs it should skip the rest.

I.e I want to be able to write strings UP to 16 chars in my terminal program, and get them as a string or array.

This seem to be a bit harder than I first thought ?

It was very easy to read single chars with HSERIN.. and I thiought it would be easy with something like

HSERIN [ str rxarr\16\13 ]

..But no ?

Does anyone have a bit of sample code that do this using HSERIN ?