I have a device that is connected to PC through USB cable.How to communicate between device and PC?
I have a device that is connected to PC through USB cable.How to communicate between device and PC?
Last edited by jayalakshmi.h; - 27th March 2009 at 11:10.
Make a program, and make sure the power supply is turned-on, or teach'em to speak louder... this assume a Microphone and speaker are intalled on both side
USBDemo
http://www.picbasic.co.uk/forum/showthread.php?t=5418
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
thank u for replying me........... but i did't get complet idea ............plz send if u have any code in VB or c# .............do u know about USB master to slave converter............
Last edited by jayalakshmi.h; - 28th March 2009 at 15:43.
The USBDemo link I gave should be more than enough to get started. It has VB6 code in. If you need .NET syntax, you may try to use the automatic Upgrade/converter tool.
There's also a VB.NET template available at the following link
http://www.picbasic.co.uk/forum/show...27&postcount=9
If you know VB & C#, it shouldn't be that hard to convert that VB template to C#.
Another alternative is to use Jan Axelson's codes
http://www.lvr.com/hidpage.htm
Not sure to understand what you mean, but I feel you might talk about USB OTG. If so, there's no USB OTG available for PIC16, PIC18, just for PIC24 & PIC32 family, and they're not supported by PBP.do u know about USB master to slave converter
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Turn on the scanner and install the sound card drivers so that the mouse can burn the dvd via the usb cable. Well at least that may help if we had more info.I have a device that is connected to PC through USB cable.How to communicate between device and PC?
What is the device?!!!! What are we mind readers?
Bookmarks