Hi all,

I have problem with my first experience with of PBP PIC
My first attemp is blink an LED.

here is my program

CMCON = 7


TRISB.1 = 0


LED VAR PORTB.1 ' alias PORTB.4 to LED

loop: high LED ' turn on LED connected to PORTB.1
Pause 5000 ' delay for 5 seconds

low LED ' turn off LED connected to PORTB.1
Pause 1000 ' delay for 1 seconds

GoTo loop ' loop and blink LED forever

My problem
The LED did not turn on but when I (accidently) touch one of the pic pin the
led will on for a while then off again.

Can somebody help me with this problem.

Really need help from all the gurus in this forum.

Thanks and regards.