Cannot Open File Compile Error

Closed Thread
Results 1 to 10 of 10

Hybrid View

  1. - 9th January 2009, 14:48 #1
    Perrin`'s Avatar
    Perrin`
    Perrin` is offline Junior Member
    Join Date
    May 2008
    Posts
    21

    Default Cannot Open File Compile Error

    MPLABS IDE 8.10

    Error[105] C:\PBP\12F629.INC 21 : Cannot open file (Include File "P12F629.INC" not found)
    Error[113] C:\PBP\12F629.INC 22 : Symbol not previously defined (_INTRC_OSC_NOCLKOUT)
    Error[113] C:\PBP\12F629.INC 22 : Symbol not previously defined (_WDT_ON)
    Error[113] C:\PBP\12F629.INC 22 : Symbol not previously defined (_MCLRE_ON)
    Error[113] C:\PBP\12F629.INC 22 : Symbol not previously defined (_CP_OFF)

    This confuses me because... I havent changed anything since yesterday other than I installed C18. However my other projects with 18F2520 still compile. A whole ****load of errors after these ensue, but I believe its due to the first one. I checked and C:\PBP\15F629.INC is there...
  2. - 9th January 2009, 15:01 #2
    Perrin`'s Avatar
    Perrin`
    Perrin` is offline Junior Member
    Join Date
    May 2008
    Posts
    21

    Did you find this post helpful? Yes | No

    Default

    EDIT: didnt solve it, see below
    Last edited by Perrin`; - 9th January 2009 at 16:32.
  3. - 9th January 2009, 15:37 #3
    Samoele's Avatar
    Samoele
    Samoele is offline Junior Member
    Join Date
    Jan 2006
    Location
    Slovenia EU
    Posts
    32

    Did you find this post helpful? Yes | No

    Default

    where was a problem?
    Last edited by Samoele; - 9th January 2009 at 15:40.
  4. - 9th January 2009, 16:30 #4
    Perrin`'s Avatar
    Perrin`
    Perrin` is offline Junior Member
    Join Date
    May 2008
    Posts
    21

    Did you find this post helpful? Yes | No

    Default

    It was trying to use the MPASM from the MCC18 directory.

    So when I said I I fixed... I guess I lied I could get things to compile but when I programmed, even the most simple program it wouldnt work in C PBP or ASM. When I tried to use my ICD2 it gives me

    CD0083: Debug: Unable to enter debug mode. Please double click this message for more information.


    Which isnt very helpful.... any suggestions? I'd first like to go back and have the ability to program/debug my programs with PBP, then I'll go on from there.
  5. - 9th January 2009, 16:40 #5
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,614

    Did you find this post helpful? Yes | No

    Lightbulb

    Hi, Perrin

    The MPLAB 8.10 release made me loose lots of Hair ... Microchip Highly recommended me to turn to 8.15a release. ( I DO agree ...)

    Also Verify in MPLAB if PBP still is in the available compilers list ...

    Alain
    Last edited by Acetronics2; - 9th January 2009 at 16:43.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  6. - 9th January 2009, 16:41 #6
    Perrin`'s Avatar
    Perrin`
    Perrin` is offline Junior Member
    Join Date
    May 2008
    Posts
    21

    Did you find this post helpful? Yes | No

    Default

    It is... I'll upgrade now I guess... and ya PBP is still available in compilers list, my code will compile, but it wont allow me to debug. Even when I program it with working code, it doesn't operate. As a side note, the code works in MP SIM
    Last edited by Perrin`; - 9th January 2009 at 16:44.
« Previous Thread | Next Thread »

Similar Threads

  1. 16F877A Microcode Studio won't compile
    By curt66111 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 25th November 2009, 19:35
  2. Loop with two motor and 2 sensors
    By MrRoboto in forum mel PIC BASIC
    Replies: 4
    Last Post: - 8th December 2008, 23:40
  3. Optimizing DIV
    By skimask in forum mel PIC BASIC Pro
    Replies: 41
    Last Post: - 22nd September 2008, 04:58
  4. 18F452 compile error
    By Woodzy in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 10th November 2006, 16:56
  5. 16F88 Compile error
    By Toley00 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 2nd November 2005, 00:22

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules