oh, already posted.
Type: Posts; User: KVLV; Keyword(s):
oh, already posted.
a quick search found this http://melabs.com/samples/PBP-mixed/sdfs3.htm
Hi Iris,
I am planning to make a pcb in 10x15 inch panel including 3 or 4 designs.
I wonder how do I specify where to make a v-score in Altium design (10)?
it turns out that my programmer program cannot load eeprom passed the 255 bytes and since corrected.
the tinybootloader is also cannot write beyond 255bytes
so my temp solutions works for now.
Thanks scalerobotics.
I have a temp solution, workaround.
this program will write the needed data to the eeprom and use the one posted above to read.
...
my compilation came up with 1686 bytes
fyi: i used tiny bootloader to load the hex file to the pic and also
use my trusted programmer to load the hex file.
the display cannot pass the 256...
Dave,
yes, i did verify the chip use 18f2620.
also i use windows 7 32b
i have done/checked all the info from the top post to this end.
I just wanted someone on the other side compile and...
hi I bring this thread up because i have trouble compiling eeprom passed the 256 bytes
chip used 18f2620 it has 1024x8 byte of eeprom
pbp pro version 2.60a
mplab ide 8.63
mpasm v5.39
microcode...
just some code correction. as the above was posted 6 months ago. the attachment is the corrected code.
' Dec 18.2010:
' rewrite so that we can adjust the day of the month of OCt, November and...
''****************************************************************
'* Name : RTC2620.PBP *
'* Author : KVLV ...
Updated:
I use part of the OP program to control a broken oil heater, this time I use solid state relays.
the attachment included with the .pbp file and schematic in .pdf also 2 non-modified...
skimask
have you tried this site >> http://www.matrixorbital.com/
do it this way
if y=3 then
variable.3=0
...
- chip use: pic16F876A running @ 20MHz, 2x20 alphanumeric LCD, DS18B20, MAX233
- software: when first power up the PIC scans for the DS18B20 and store ID ROM in the PIC's ram for later use. When...
this is only suggestion, if the lm35 is for reading temperature, then i suggest using 1-wire device like ds18b20. the ds18b20 only require 1 pin from the pic12f675.
loop:
high portb.0
pause 500
low portb.0
pause 500
goto loop
try that.
please see this post, Brandon has the same statement as yours link >> http://www.picbasic.co.uk/forum/showthread.php?p=47826#post47826
ADCIN PORTA.0,V1
should it be:
ADCIN 0,V1
indeed, substitue BAUDCTL.3 = 1 with BAUDCON.3 = 1, when compile produced no error.
I use USB on board of the pic for transmitting/receiving data.
Thanks Darrel.
I searched through my program, there is a "Hserout" command, I commented it out and there is no further warning.
I did copy
DEFINE HSER_RCSTA 90h ' Enable serial port &...
i am learning how to use Mister E piccal.
thanks Darrel.
i remember correctly in my program that i set the baud rate anywhere. I am using CDCDESC.ASM for virtual com port.
I am using the orgional bootloader from Microchip.
I got this warning when compile my program. The whole message is "Warning[202]\PBP\PBPPIC18.LIB 7588 : argument out of range. least significants bits used. "
FYI: pic18F4550, MicorCode studio...
sorry, i misread.