Hi james,
Scaling the A/D input voltage by (230ohm+10kohm) divider or adjust the Vdd at
5.115 volt,and if ADVAL>=511 then Farenheit=9ADVAL-4594.(Last digit is decimal fraction)
If ADVAL<=510 then...
Type: Posts; User: a.majid; Keyword(s):
Hi james,
Scaling the A/D input voltage by (230ohm+10kohm) divider or adjust the Vdd at
5.115 volt,and if ADVAL>=511 then Farenheit=9ADVAL-4594.(Last digit is decimal fraction)
If ADVAL<=510 then...
Hi all,
I would like to use seeprom 24C512.
Please tell me how to assign control byte.
Thanks
Hi,
One of PBP build in maths functions is sine.
This mean PIC pin can generate time dependent voltage.
So by means of software pwm(***pbp build in function) technique you can get any analog volt...
Hi,
12F675 A/D converter output is 10 bits wide data.
adval and adval2 should assign as word.
Please take care about ansel and adcon settting.
Hi All
If it is legal,I would like to get the .inc and .bas files for
12fxx,16f818,16f819.
I am PBP2.4 owner,I would like to modify its to use those MCUs.
Currently in Myanmar(50 milllions...
Hi JDM160
'define ports
green VAR TRISA.0
red VAR TRISA.1
blue VAR TRISA.2
Above is your intial code.
TRISA is data direction contrl register for PORTA.
You should use PORTA.0,PORTA.1 and...
Hi Srigopal
As value $01=01=%01,so what you write $01 or 01 is no difference.
Compiler only know bit ,byte,word(data type). No more Hex or Dec.
Mcus work only on binary.
Your output...
Hi Peter
No.
You must set the bits of ADCON0.
If bit 6=0 ...Vdd is reference.
If bit 6=1 ...AN1(GP1) is reference.(To do this you must set GP1 is analog)
You can find details on page 43...
Hi All
I am PBP2.4 owner.
(I had lost my chance to upgrade,because of according to current situation of
our country,we have no credit cards and UPS service.)
I would like to modify PBP2.4 to...