I was just on mouser's web site thinking of order one Darrel after you mentioned adhoc, I've gotten pretty comfortable using the 16f628a in my projects and am looking at the 18f's to experiment with...
Type: Posts; User: tazntex; Keyword(s):
I was just on mouser's web site thinking of order one Darrel after you mentioned adhoc, I've gotten pretty comfortable using the 16f628a in my projects and am looking at the 18f's to experiment with...
yes, that would be fine. It would be nice if all I had to do was power up the module and the SSID would broadcast but I would have to time it out so my battery would not be exhausted prematurely. ...
Thanks Darrel, well thats money down the drain. What would you recommend for something I can see on the pc wireless network that I could broadcast an ID every so often? That would be pretty cool for...
I ordered the MRF24WB0MA with the daughterboard to play with. I thought it would come with more documentation that just the pinout of the board. After seeing a 2009 post on here about this same...
Thank you Mackrackit, you have been very helpful. I have tried the live search prior to posting must be my wording. Again, many thanks.
73
Hello,
I have been searching the forum for suggestions to be able to use a pic to connect to a wifi module and ultimately just broadcast an id that I could see in the windows wireless network....
Thanks for the reply, So as it is in the previous post it seems to work, but I just was looking over the datasheets of both the PIC's this past weekend. I was just curious how it works, I am still...
Am Using the correct timer, I am using an external 4mHz oscilliator on RA6 and RA7, I've just noticed that on the original code Bruce has the PIC is a 12F635. T1CON: TIMER1 CONTROL REGISTER bit 7 is...
Thanks,
After purchasing the PicKit3 first and having no sucess programming my pic, I took the suggestions on this forum and bought a PicKit2. I have had no problems with it, and the logic...
I did see that but just thought that was to easy and I must have been missing something. But I have done what you said and it works.
Thank you very much for your help
Perhaps I could use the external brown out protection with the 3.3V regulator as shown on the datasheet, I like the Example2 version.
Thanks Gadelhas for the fast reply, I tried to compile using that and I get this error:
@ __CONFIG _XT_OSC & _WDT_OFF & _MCLRE_ON & _LVP_OFF & _CP_OFF
DEFINE OSC 4
CMCON=%00000111
VRCON = 0 ...
I did read about the Vbor, but also in the electrical specifications, it state minimum brown out reset voltage is 3.65V. Using a 3.3V regulator I rekon that cuts that out of the picture.
Well, I...
I'll do that this evening, Thanks to everyone for your help.
Bruce, thats how I have it, However, I have brown out reset enable on my winpic programmer software, tried it with PICkit3, PICkit2 and it won't work, BUT if I turn off the brown out reset manually...
Sorry about the delay getting back to ya'll. Ok, your instructions said:
1 - Connect the RA4 Pin with the resistor to VCC;
2 - Connect the anode of the led beetwen the resistor and the RA4 Pin;
3...
I have it working with this code:
DEFINE OSC 4
CMCON=%00000111
VRCON = 0
PAUSEus 10
TRISA = %00000110
TRISB = %11110001
PORTA = %00000000
PORTB = %00000000
OPTION_REG.7 = 0
First thing, yes I did search the forum on this question although I was certain I already was correct in my thoughts about ra.4 on my 16F628A. Melanie makes it quite clear especially with this post:...
Thanks for all the suggestions. Using the comparator or the MC34064 both are great ideas, but wouldn't the just keep reseting? What I mean is applying the 9V battery to the input of the LP2950 5V...
Thanks for the reply, what I am trying to do is to prevent any damage to any components because of a low battery. What I mean is if I am using a 9V battery to feed the lp2950 5v regulator and forget...
Just curious, is there a simple efficient way to add on a 9V battery powered project ,feeding a LP2950ACZ-5.0 regulator (5V) with a 16F628A, processor some kind of protection that when the battery...
Thanks for all the responses and I have installed the PICit 3 Programmer (Beta Release) and all is well. After watching those videos above I may still buy a PICit 2, the logic analyzer could be...
Isn't that wonderful, ...
Just received my pickit3 with 44 pin demo board. I use PBP 2.50 and am used to programming my chips with Winpic along with the simple ICSP shown here on the forum. But it appears now that I need to...
Looking at the datasheet I just changed the timer from Internal to External :
from this:
' Setup Timer1 for resets after ~65.5mS
T1CON = %00000000'%00000000Internal clock, 1:1 prescale,...