here's the solder paste >>LINK<< I've used for a while... think I've had one tube for about 2 years... keep it in a fridge seems to work well..
also use laser cut mylar pcb stencils to apply the...
Type: Posts; User: alesniak; Keyword(s):
here's the solder paste >>LINK<< I've used for a while... think I've had one tube for about 2 years... keep it in a fridge seems to work well..
also use laser cut mylar pcb stencils to apply the...
here's a modified schematic, this doesn't reflect the pcb's in the pictures above
it's been changed a little adding a diode for reverse polarity protection, and removing a few pins from the design...
took a little while (day job gets in the way!) but here's what I ended up with..
still have to finish my table assembly but the building blocks are nearly done
I have hand assembled about 120...
hmm, must be a IE thing, I use firefox or chrome and the video seem to work fine.
so sorry for the delay, I decided to make a about a hundred modules to build a
interactive light table, so took...
the circuit is just a phototransistor and a resistor for the detector, I added a IR led next to it as well so it works in the dark. I sample the ADC every few ms and calculate the difference from...
update: finally got time to test the new MIBAM with the 12F1822 and works like a charm!! good stuff.
So.... to make a more "proper" test I figured I'd whip up a little project to give a better demo,...
fantastic! thank you again... going to give this a try this evening and report back. (day job and stuff..)
question: is it going to be possible to use the hardware uart while mibam is running? ...
fantastic! thank you Darrel! looking forward to it..
I changed out the ANSELA line... not quite sure what is wrong with it.
(and removed the DEFINE ADC_BITS 10 line as well)
seemed correct looking at the datasheet....
Thanks for the help!
so just tried the modMIBAM code, unfortunatly still getting strange results. different results but still not correct..
so now the led's do the initial test light up and...
first off greetings, been a long time lurker here, can't even remember the number of times posts from this forum has saved me, usually when I'm stuck a quick search get's me unstuck with ease... so...