HI,
Like to dust off my picbasic on a new project....so wondering if there is a pin compatible PIC equivalent to the 80c51?
It's a 44pin Quad flat pack. Hence ideally need somethign I can lift...
Type: Posts; User: robertg; Keyword(s):
HI,
Like to dust off my picbasic on a new project....so wondering if there is a pin compatible PIC equivalent to the 80c51?
It's a 44pin Quad flat pack. Hence ideally need somethign I can lift...
Hi All,
Working on a project that requires extending communications over a long distances, the repeater stations are powered via Solar/Battery. Each repeater point will also have 2.4Ghz WiFi...
Hi Henrik,
Guess I didn't read that section!! :-(
Rob.
Thanks Henrik!
That worked, but where did you find all those configuration bits? I've looked high an low but all documentation I've seen refers to INTOSCIO or INTOSC or something along those...
Attempting to set configuration bits using PB pro 3 and running version 8.88 MPIDE and trying to work out how to set and use the internal oscillator as follows
#CONFIG
__CONFIG ...
Hi,
Having problems with using serout2 and sending a segment of a string need some advice please:
pointer=9
length=10
Pointer and length setup as var byte.
xyz var byte[70]
Thanks,
But 60K is still short of the target height.
Can anyone suggest something else?
Rob.
Hi All,
Put my hand up to build the telemetry for a "High Altitude Launch Platform" http://www.halp.co.cc
Considering using the Altimeter Module MS5607 and reading specs can work up to 120K...
Hi Bogdan,
Great starting point, I'll order one as well!
Have butchered a PCB from one of the many cheap junk radios with a Ipod dock. The pins and pitch of the connector make it challenging to...
sure, using a 16f677
Have progressed a little by sending at 9600,not inverted SEROUT2 portb.6,84,[255,85,3,2,0,1,250]
Catch is, can only do it after the leaving it plugged into the Sony Ipod...
Hi all,
Have been trying in vain to get a simple string to make a ipod play.
Here's a snipped of my code, it's sending out @ 9600 and using 8mhz crystal
SEROUT2...
Worked out my own problem....
Not sure what it was, but recreated a new project dropped in the original .bas file I created and compiled perfectly.
Rob.
Hi All,
Just installed MPLAB on new 64Bit Windows 7 laptop
Few hoops to get it all going but down to the last error when compiling.
Read below for more detail , but it basically fails with...
THink you've nailed the product for me ronjodu the siteplayer looks very simple and quick and relatively cheap method to have IP connectivity.
The lantronix is a nice solution but a little too high...
Hi all,
I've seen a few threads floating around about interfacing to ethernet, but nothing is pointing me in the right direction.
Put simply, want to send and receive information via the internet...
Thanks for replying,
Most of the stuff seems to be orientated to interfacing to a keyboard not the other way around. Which I'm guessing is more difficult.
I'm sure it's easy, but I just don't...
HI All,
Does anyone have BASIC code for a PS2 keyboard emulator software?
Have looked high and low and seen plenty of info on this subject but can't find any working code.
Thanks,
Rob.