maybe you can get ideas here: http://machsupport.com/forum/index.php/topic,50.0.html
Type: Posts; User: peu; Keyword(s):
maybe you can get ideas here: http://machsupport.com/forum/index.php/topic,50.0.html
Routing and Drilling the PCBs
http://www.youtube.com/watch?v=9oDjPjiNE9Q
Anand, can you post the part of the code where you encode the trigger for the Canon, I would like to add it to the timelapse remote I'm building. Thanks!!
Pablo
Here is version 2 of the PENTAX / NIKON IR remote, yes, I added Nikon support, needs to be tested with a Nikon camera as I don't have one.
Removed Darrel's Instant Interrupt elapsed timer because...
Solved the trigger by holding button, ingenuity works :)
I still can't figure out why the led does not blink while counting time at the first while wend
And I noticed the ASM SLEEP does not...
While debugging the firmware I took so many pictures that I decided to make a timelapse out of them :)
Enjoy in 1080p
http://www.youtube.com/watch?v=PtOaztPppgc
Added the timer as suggested and it works! BUT, now I lost two things and I don't know why:
1) the led thats supposed to flash once a second inside the time counting loop only flashes once.
2)...
the problem was the LCDOUT, doh! :) back to learning this interesting interrupt stuff
interesting, never looked deeply into them, now that I did I have some warnings at compile time, maybe you can help me
PIC12F683
pbp 2.60b
latest mapsm from MPLAB IDE v8.63
Downloaded...
I started with a Canon A570is and CHDK but wanted to use the DSLR for its many advantages, built the diodenring timelapse but my brand new pentax K-x does not have the 2.5mm jack as my previous...
Current version instructions:
to enable timelapse function press pushbutton while powering ON the remote, the red led will flash each second passed, once you release the pushbutton this will be...
add resistors for LED, not included in schematic (and neither in my protoboard :) ) and a transistor for more IR range, measured 387 microampere in the main loop while in sleep and 8mA while...
Nikon Protocol: http://www.sbprojects.com/projects/nikon/index.htm
Canon: http://www.doc-diy.net/photo/rc-1_hacked/
Bruce, you are right again.
After thinking about... lets say 2 minutes :) here is the code, I hope you and everyone else help me to make it better, there are a couple of things that can be...
You are right, I left it again the way you coded it and it works the same :)
Thanks for the example BTW, without it I would be lost.
I finished the full timelapse+remote code but Im keeping it...
The code I posted had the duty cycle inverted, just modified the assembly routine (swapped BSF & BCF) and it works, just tested it with my pentax Kx. Im happy :)
fratello: tested your code but it...
This is what I got so far, I need to test it tomorrow with a camera, in simulation it looks OK, but I'm open to suggestions for improvement.
I need to code the operator input side of the program...
I want to make an infrared remote for the new pentax cameras for doing timelapses, as any timelapse shooter it involves triggering a IR sequence every X amount of time. The interval part is pretty...
thanks for your replies, I hope in the future you post an hex with step/dir so I can control it using mach3 software. Thanks!!
Nice project! four questions:
1) Can this driver be used with 4 or 8 wire motors?
2) Can the microstepping be changed to 1/10?
3) Can the driver be modified to be used with step/direction...
how impolite on my part, I wanted to say thanks to ALL who replied :)
Thanks for your replies Melanie, one question, do you know how long it takes (in milliseconds) for the DS1307 to be read into a picbasic variable?
a 12x12 led matrix sequenced row by row needs to be turned on at least 70 times per second, so the loop needs to run 70 times 12 per second, that translates to 1.2ms per row, if I read the DS1307 at...
lets say you need to pause these pins starting from the same initial port status and time:
porta.1 15 secs
porta.2 10 secs
porta.3 5 secs
you can do this:
porta=%00000111
pause 5
Hi, I want to do two things at once, and I don't know how :)
Let me explain, I want to update a led matrix (12x12) this needs to be done real fast so the eye, due to persistance of vision , thinks...