Another chip you should like to try is the 16F723A.
Is pin compatible with the 16f882,28 pins,internal oscillator
and very cheap..
Greetings...
Ruben de la Pena.
Type: Posts; User: Ruben Pena; Keyword(s):
Another chip you should like to try is the 16F723A.
Is pin compatible with the 16f882,28 pins,internal oscillator
and very cheap..
Greetings...
Ruben de la Pena.
Hi:
I use this routine to send eeprom stored msg's to display LCD.
It can be modified to send then to a string...
I hope this helps......
Robert:
It works... the problem with Porta.6 was configuration. It was as oscilator output.
Changing & _CLKOUTEN_ON TO & _CLKOUTEN_OFF , in _CONFIG2 ,turn off the porta,6 and then
can be...
Robert: กกก PROBLEM SOLVED กกก
The power supply is 5 V. I am checking Portb.7 because I config the DACCON0 as $90.
This enable the DAC and select Portb.7 as output.
I move the DACCON0 register...
Hi:
I made this program and I can only get from 0 to 3.77 volts in the DAC output.
'****************************************************************
'* Name : EJERCICIO_16F1783.BAS ...
Hi Darrel:
Thanks ... I reloaded the files and now it works...
Ruben de la Pena V.
Hi Darrel: I made a little test with this:
DEFINE OSC 8
' **** CONFIGURACION 16F1826 *************************
#CONFIG
__config _CONFIG1, _FOSC_INTOSC & _MCLRE_OFF & _CP_ON & _WDTE_OFF
...
Sorry, my mistake...
I did not see the data sheet and I have not used this Pic.
I read you need use AN3 as adc input and I assumed this was at Gpio.3.
It is at Gpio.4, then you need set trisio.4...
Hi
You are setting gpio.5 as input with trisio = 100000
Only gpio.3 must be set to work as adc.
Then the correct trisio = 1000. Or = 8
Greetings...
Ruben de la Pena .
YES... it really worth it...
I got the new Gold version one week ago. The easy of configuration and the new arrays possibilities...
I did found that the new version of MCSP 5.0 was edited and...
Hi:
Thanks Steve, it works now !.
Greetings...
Ruben de la Pena Valdes.
Dear friends:
In PBP3,all pics are assembled with MPLAB,
EXAMPLE:
For the PIC 16F886 I am using
#CONFIG
__config _CONFIG1,_INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_OFF & _LVP_OFF &...
Brian:
I only use the read routines for a little wav player. I use a 16F1826 at 16 mhz.(Internal Osc).
The working routines:
'******************************************************
TESTREAD: ...
Brian:
Thanks for your fast response...
I am reading wav files stored in the M25P, and using this to send the address:
cs1 = 0 'SEND COMMAND AND ADDRESS
SHIFTOUT...
Brian:
Do you can share the read routines for the M25P128 ?. I am using the M25P16 but my reading
is a little erratic.
Thanks in advance...
Ruben de la Pena V.
Dear friends:
I have one almost silly question:As you know,the baseline PICS starts
their protection at address $40,(PIC16F54), how can I tell to the PICbasicPro
to start working at that address.?...
David:
I downloaded the file,unzipped it,and the 16F886,16F887 does not appear.
(The readme.txt has more names than the included in the unzipped file.)
Your post is dated 3 years ago... Do you...
Hi:
The 18F25J11 is not included in PBP. May be in the P250d.exe upgrade.?
Greetings...
Ruben de la Pena V.
Thanks... I will try it...
Greetings...
Ruben de la Pena
Hi friends...
Somebody knows if it is possibe to use the 16F877 bootloader on a 16F887 ?.
Thanks in advance...
Ruben de la Pena V.
Thanks Bruce:
Your last mail works. But is a little weird to have to change the "format" of the device directive. "Omit in the DEVICE2 the PIC name".
By the way, I test the DEVICE with upper and...
Dear friends:
I am working with a 16F886 in PM,PBP2.50b,and I have no problem with the configuration,until
I try to set the BOD voltage to 2.1Volts.
Here is the config..
@ device pic16f886 ,...
Hi Bosse:
If you are using the port A as digital, you will need to disable too the
comparators.
CM1CON0 = 0
CM2CON0 = 0
Greetings...
Ruben de la Pena V.
Hi:
It is possible to get a bootloader file for the 16F887..? If so... where...?
(4 and 20 mhz).
Thanks in advance...
Ruben de la Pena
Hi friends:
Do you have seen the Video Stamp article in Circuit Cellar april 2008.(Issue 213) ?
It is a portable terminal RS232 with a PIC 18F2520 and 3 resistors...!
It is a assembler program...