I don't know any thing about websites or mirroring software as a preface. I downloaded winHTTrack, it directs you to name a project folder. Then I copied and pasted the address from here and started....
Type: Posts; User: mark_s; Keyword(s):
I don't know any thing about websites or mirroring software as a preface. I downloaded winHTTrack, it directs you to name a project folder. Then I copied and pasted the address from here and started....
I would like to do the same for a few forums I follow.
Httrack website copier looks like it might work
Found this video on Httrack and learned how spoof hacks are done.
...
What you want to do is little complex
On Arduinos, they use a usb to serial bridge ic like the FTL232, there is no built in burner. The IDE compiles and loads the hex via the usb to FTL232 to AVR...
PBP never supported 16bit devices. The Melabs U2 programmer did support some pic24 and dspic.
Maybe you are thinking of Proton Basic which had a 16bit version?
I use "Adblock Plus" and don't get any pop ups. Doesn't seem to affect browsing speed and is free.
https://adblockplus.org/
The pixels are smaller than on a charactor display.
In the text mode you can get 8 lines by 30 charactors with a 240x64 display.
Do you have a datasheet for the displays you are getting?
...
The built in fonts are 6x8 or 8x8 pixels. So they are very small. Most users want different size fonts. The compsys1 pbp code works
...
Have you tried something like this?
Myword2.5 = Mybyte1.2 'move bit 2 of Mybyte1 to bit 5 Myword2
Myword2.6 = Mybyte1.3
Myword2.7 = Mybyte1.4
Myword2.8 = Mybyte1.5
I didn't know these existed. I found this document which shows that it can be interfaced in 8bit parallel, SPI or UART. Which means you can probably use a pic16 for a simple data logger. A may order...
This should make it work
TRISA.5 = 1 'make porta.5 input
ANSELA.5 = 0' make porta.5 digital
LED VAR LATC.3 ' Use lat for output and port for input
It's really important to search and...
See the code examples from Les Johnson in second post. I had this book many years ago, now out of print. You can find pdf's copies on google
http://www.picbasic.co.uk/forum/showthread.php?t=21115
At the top Define 16mhz or 20mhz
OSCCON = 0
In the config replace
_INTOSC or _INTRC_OSC_NOCLKOUT with _HS_OSC
See the PDF file in the first post of this thread. It looks like the same module as you have. As far as folders for mp3, I have no knowledge. Maybe you can can use 0?
Looking at the data sheet page 6, in post #1.
Play a track 7E FF 06 14 00 10 FF FD D8 EF , without checksum 7E FF 06 14 00 10 FF EF 10 FF = folder 1 track 255, The upper nibble "1" specifies...
Is your pic16f819 the 18 or 20 pin version? Check the data sheet. The programming pins are not in the same location. Your mclr, PGC and PGD need to line up in the ziff socket. If you are doing in...
Hi
I programmed 16f819's and 818's in the past with my u2 without problem. Many times these kind of errors are from having a bad connection between the programmer and pic. Or having the PGD and...
Just like DT's interrupt routines, you some times need to comment out a few lines in the include file
Look inside "SSPWM.inc"
' --- IF any of these three lines cause an error ?? Simply...
Your frame looks great.
What are your rollers made of PVC pipe?
Henrik, I always wanted to try using the CCP module for this purpose, but not sure how to keep track of the number of pulses. Maybe feed the pwm output into a timer to keep count?
Mark
You are making a lot of progress. Increase the current setting, just monitor the motor for excessive heat while experimenting. 12 volts is on the low side for what you are doing. For small projects I...
I am interested in following your project. It's nice to see a real application being developed.
Thanks for posting
It's depends on your power supply voltage and what you are driving with the motor. I would start at half of the rated current and see how it works. Yes the NEMA number is the mounting size. What are...
David, at 200 steps per revelolution the motor will run rough. Once you get it running change the dip switches on the driver to 1/8th step or 1600 pulses/rev. It will run much smoother.
Mark
This is a simple way to generate step pulses
Count = 1
While count < 2000 ' Send 2000 pulses rotate motor 10 times
Latx = 1 'Output 10us pulse to stepper drive
pauseus 10
Hi Mike,
Just received the latest Nuts & Volts with your Nextion article, good work. Wish I had this two years ago!
If you like writing articles, B4A is now free and programs much like the...