Search:

First I Would Like To Thank All That Helped Me Thru The Last Problem

Great Help

Quick Question I Hope

Where Do I Find The Proper Adcin Settings

Adcin 7 Set Port A And E Digital
But I...

Thanks For The Math Help
As For As Speed Goes I Have Treid 4 And 20 Does Not Make A Difference

Will Work On The Math Issue

Do You Have The Thermostat Program In Pbp Not Hex

Thanks

Manwolf
Worked With Your Pbp And Your Right It Is Displaying The Correct C Temperature

Its Pb Math Thats Incorect

Any Ideas How ?

Also The Formula Temp = ((temp*1.8)+32) Gives Corect...

Want To Thank All Of You For Your Help Been Great To Work With
Will Keep You Updated

Also Would Like To Look At The Pb Code For The Thermostat Program

If Not Giving Away Something

Again...

Read 65.xxxx

Does Not Update Hold Sensor And Nothing Changes

Reloaded Several Programs And They Work However Still Get Low Tmp Reading

Dont Think Its A Hardware Problem Because It Works...

Tried This And Get Better Reading Only 6 Deg Low

However It Does Not Respond To Any Temperature Changes

Thanks

the osc is correct dont know why it did not show caps
tried going with 4 still read low
? what changes in math
TEMP = ((TEMP*9/5)+32 ) is what i am using
thanks for the inputs

have not...

i have attached the 2 programs one in pbp which reads temperature incorectly
the other mikroe which works no hardware changes are made really interested in the difference


thanks

jack

I Do Appreicate Your Inputs
Manwolf Your Program Looks Great But Way Beyond My Knowledge
And As For As The Ds18 Goes I Have Tried Several

Again To Ask ?
Why Does Mikro Work Where Pbp Does Not...

Finally Got It Working Better
Thanks For The Inputs
Notice I Said Better Still Reads 10 F Deg Low
But Better Really Dont Understand Why Mikroe Works Perfectly With The Same
Hardware Using Pbp...

thanks for the prompt responce
http://www.rentron.com/PicBasic/one-wire3.htm
using this program with changes made for a different type of display
noticed it used the 18d20 but cant seem to find a...

i have tried several programs on this and several other sites to read temperature
read a lot of posts on the subject and have been able to get most to function
however the temperature readings are...

What Type Files Is This. Rar
Trying To See Document

Thanks

just must be my math but device is higher in cost us$ and higher in shipping

have used easypic and mikroe for over 2 years good product also have pbp which
has better tutorial but drives me crazy...

have done more research and find the problem is when i use mpasm as my assembler
works fine not using this could just go that way but interested in why and ideas

using mcs+ and picbasic pro 5.0 and easypic 4 board with microcode loader
can program chips thru serial port after i program loader but unable to run
the icd program say comm error timeout did...

now i remember why i stayed away from this forum and products for over a year

thanks for all you support
goodbye

trying to work with this pic on a easypic4 board . cannot get loader to work
loaded it with picflash then went to mcsp and downloaded a simple program
but says reset required unable to reset from...

thanks for the responce however i cannot get it to work
does not see reset for some reason have not made revisions yet
cant seem to understand why it not seeing reset pic is reseting
just hangs up...

anybody found a way to use mcsp and icd with this board
board great but would like to use the icd function cant quite fiqure why it should not work anybody ? ideas ?

Was Reading A Spec Sheet On The Backlight Of These Displays
Say 1500 Hrs Could That Be Right Is So Whats A Better Way This Is Not Nearly Enough

Any Info

thank everybody for there help
great answers

where is info on using this in pbp manual or others

thanks

thanks ski\
great reply probably more info than i can absorb
but you hit the nail on the head

thanks for the responce however i was not clear enough
i am trying to divide a number by a fraction number

1000/7.5 as a example pbp gives error on the 7.5 or any number with a decimal point
...