Search:

Type: Posts; User: dbachman; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    I guess I don't know how to pm..lol
  2. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    What is the chance you could email me a copy?
  3. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Ok Richard Thank you but it looks like meconfig is not anywhere.. at least I couldn't find it to download..I will keep looking but ME labs has a posting that is discontinued and end of life....
  4. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Soif I was using an internal oscillator, I would define it in Config1h and further in OSCCON?
  5. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Well that worked fine.....
    Well the board has a crystal hook up but can be strapped in and out.
    I did try just the define osc 32 with my config and it also worked...
    as you probably surmised, I...
  6. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Richard,

    This code is written in Mikro Basic I think and works...I was trying to convert it to PicBasic..

    Below it I have pasted the Config file that goes with it..

    ' *
    ' * Project name:
    '...
  7. Re: Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Hi Richard,

    I am using an 8mhz ext. crystal..
  8. Trying to get LCD to work on 18f45k22 and portB and EasyPic V7 - no luck

    Hi,
    I have tried everything I can think of to get this to work...anybody got any ideas what I am doing wrong or a missed setting?

    Thanks Don


    @ __CONFIG _CONFIG1H, _IESO_OFF_1H &...
  9. Replies
    2
    Views
    2,422

    Re: Manipulating ADC values....

    Thanks Richard, Got it working......
  10. Replies
    2
    Views
    2,422

    Manipulating ADC values....

    I don't know if that is the proper title but this is what I need to do...

    I have two ADC values and they basically are never equal. What I want to be able to do is when the values are within a...
  11. Replies
    9
    Views
    2,435

    Re: Simple question about While Wend...

    I guess that was it...the pullup resistor on the input...apparently it was floating...
  12. Replies
    9
    Views
    2,435

    Re: Simple question about While Wend...

    I am using an 18f2550.....

    Norm...I don't think I am experienced enough to use that debug code...

    I have looked back at some other code I have written and have used while/wend the same way.....
  13. Replies
    9
    Views
    2,435

    Re: Simple question about While Wend...

    this is the code..

    Trisa = 1
    Trisb = %00100000
    portb = 0
    while portb.5 = 1
    wend
    high portb.4
  14. Replies
    9
    Views
    2,435

    Re: Simple question about While Wend...

    Right.... while pin 2 is at a high state shouldn't the program stay in the while/wend loop until it goes low and then jump out and turn on the LED?
  15. Replies
    9
    Views
    2,435

    Simple question about While Wend...

    I have been trying for a while to get this simple code to work. Can someone tell me why it won't?

    Thanks, Don

    while porta.2 <> 0
    wend
    high portb.6

    porta.2 has pullup installed but led on...
  16. FYI I got it working ok except I haven't been...

    FYI

    I got it working ok except I haven't been able to send back to the PIC yet.

    Thanks Walter....


    HSEROUT ["LABEL",",","Don's",",","Test",13]
    PAUSE 10
    Loop:
  17. so like this huh? HSEROUT ["hello",cr] ...

    so like this huh?

    HSEROUT ["hello",cr]

    Hmmmm..... Maybe

    SMD?? I think I have one of those in the garage......

    I'll go get it and try it....be right back
  18. I seen that and tried a 13 for the carriage...

    I seen that and tried a 13 for the carriage return.......

    HSEROUT ("HELLO",13] is this right?
  19. There really is no code just the defines and...

    There really is no code just the defines and HSEROUT. Bare minimum. It connects and I can see the little green box with the "R" in it flash red when I reset the pic. I can receive no problem with...
  20. Yea I tried that but couldn't get it to work. ...

    Yea I tried that but couldn't get it to work.

    Thanks
  21. Getting Parallax PLX-DAQ to work with HSEROUT

    Does anyone know how to use HSEROUT to talk to PLX-DAQ? I am getting a RX from PLX-DAQ
    but apparently my format is wrong or maybe it just doesn't work with a PIC.

    Thanks, Don
  22. Replies
    5
    Views
    1,994

    Hi Acetronics, I want to output a pulse train...

    Hi Acetronics,

    I want to output a pulse train to a stepper driver controller to turn a rotary table. If I make a mistake in entry or part way through the router cut I want to stop it. I realize I...
  23. Replies
    5
    Views
    1,994

    Thats what I thought. I guess I will use HPWM. ...

    Thats what I thought. I guess I will use HPWM.

    Thanks,
  24. Replies
    5
    Views
    1,994

    A PWM question

    If I am using this statement, PWM portb.7, 127,100.

    Is there a way to stop it before it finishes?

    Thanks, Don
  25. Replies
    9
    Views
    3,110

    Thanks

    I finally got it........

    Thanks Steve
Results 1 to 25 of 52
Page 1 of 3 1 2 3