Hi,
I know you are trying to help. And I appreciate it. I dont understand that code you sent.
I really wanted just the answers to those two issues so i can do 100% in PBP.
Ken
Type: Posts; User: lerameur; Keyword(s):
Hi,
I know you are trying to help. And I appreciate it. I dont understand that code you sent.
I really wanted just the answers to those two issues so i can do 100% in PBP.
Ken
hello,
Thanks for your code, but I am not playing around with assembler language.
Have done it in picbasic ?
Cheers,
Ken
hello
I am having issues reading the 24bit data from a Hx711 module.
I used the program given here :
http://www.picbasic.co.uk/forum/showthread.php?t=23816
The datasheet mentions that when...
HI,
I am using the PIC32 chip, so I think the processing power is there. I don't mind tweaking but I doubt I will play around in assembly code..
DO you have any interesting link for similar...
Hi,
I'M making project that requires to send video (24 images seconds) wireless to a TFT screen. I was told this was not doable since TFT screen cant take that fast refresh...
Anyone knows...
HI Dwight,
Thanks for the program ,
I would not mind the schematic.
How do you know what data to put in your SEROUT statement. I looked through the earthbridge web page but did not see any...
Hello,
I am creating a module that will be receiving multiple GPS coordinates from distance transmitter.
I would like to push the information from the module to the computer to get interpret...
HI,
this is one module i am going to try, all of these have the same frequency. ..
Arduino 433MHz LoRa SX1278 long range RF
ken
Hi,
I have used in the past RX - TX chips (433Mhz) receiving one signal using Manchester encoding works fine. In my next project, I would like to include multiple TX chips ... lets say 20 and one...
Here you go :
HooHoo ! , got it all working now.
Ya bit 5 was a bit confusing,
thanks a million for your time
Hi again,
here is you example with different hours..
24Hr mode
Time is 23:00 hours, hours = %00100110 notice bit 5 is a one
add 1 to 23
Time is 00:00 hours, hours = %00000000 notice bit 5...
Hello,
I think I found the problem but I dont know how to get around it,
I have bit 5 confusing me when in 24H mode. How do you remove it from calculation,
The problem is this,
You need to...
Concerning your table:
With 12Hr 04PM $64 0110 0100 100
Without 12Hr 04PM $4 0000 0100 4
what do you mean with or...
I am having difficulty dealing with the bit 5 and 6 of the hours..
using the subroutine add hours:
I have 11 with bi6 and bit = 0
click on addhour, brings me at hour 32 with bit 6 = 0 and bit 5...
The bit RTCHour.5 is mixing the time up.. I think..
Why did they use it at a dual purpose.... !
HI,
I am adding to the program and came across another difficulty,
I used one button to increments hours and another to increments minutes. Minutes works fine.
But hours, when I start with 19H,...
HI,
I rework your code so I can read it on my LCD:
Its works ! dont know what we did wrong in the previous version.
Also works equally good on DS1337 and DS1307 !
Thanks a lot to all
Starting with 19H pushing button attempts shows (4 trials one after the other) :
- 87 very briefly then 7H. ok, good enough..
- 1H
-23H
-73H briefly then 13H
I really need to sit down and...
I try these lines:
if RTCHour.6 =0 then RTCHour.6 =1
if RTCHour.6 =1 then RTCHour.6 =0
instead of hourmode = ! hourmode
hourmode is always showing 0 after going from 19 to 7 . and stays at...
Thanks for all the help.
I just tried your code tabsoft, work very good from 18H to 7H, but not the opposite.
hourmode = not hourmode
but still I print out on the LCD that specific bit and I...
Hi Richard,
Trie both code with same error,
It does seem to go from 19h to 7h.
When I attempt to go back to 19H I get a four appearing before the hours .. like so : 7:01:01 to 47:01:01 then...
Here is the full code.
The display gosub is not being used, will be used when display in a 7 segment display.
Now I am using a LCDout command to view my numbers
...
Hello,
I am trying to convert from 12h mode to 25H mode and vice versa with a Ds1337 chip. Not getting great results for now.
What I understand Bit 5 and 6 or the hours plays a role in...
Thank you for the help,
the pause after the I2Cread was screwing me up badly.
I get clear segments now.
I now have a different issue !!
Some of the segments not being used oare still being lit...