encouraging to be back with our site after a long gap
Good that you got 10 and are happy.
i checked ebay to day. some sellers offer 10 at little less than 10$.
However, no point in searching...
Type: Posts; User: mvs_sarma; Keyword(s):
encouraging to be back with our site after a long gap
Good that you got 10 and are happy.
i checked ebay to day. some sellers offer 10 at little less than 10$.
However, no point in searching...
perhaps i too am leaning off late. you need not feel sorry please.
as you define the chip under microcode at the top by selecting device, you need not mention device name in mai program. later, while loading thehex, you can changer setting like internal osc with...
please give the link. What what is it expected to do? Whether a schematic is also given?
@ Steve,
Perhaps one can convert it to work on a modern TFT type NOKIA lcd display, as 3310 displays may not be available in future.
they purchase resale stuff very cheap, and push them at nominal margin.
we , perhaps , need not doubt the quality of the item.
FTDI came up with a new chip with host capability, as of now the chip is too costly at approx 280$ .
Fratello's code has definite mistakes, and need attention. With the mistakes How it was working for him is a wonder.The suspected line numbers, i shall be indicating for consideration / possible...
when the same is compiled and loaded, it just behaves as i reported earlier a frozen value of 0.06
no variation
But luckily it is working for you perhaps. May i expect a hex file for 16F628A...
complied code and also the corrected .asm are attached.
the file had four Minor errors. corrected file and a complied hex are attached
I feel if one could write straight in assembly language, it would be smaller, in size. my comments may not suite the site s it is meant for promoting BASIC
Hi Fratello,
I tried to compile the file you put here. It did not give any error to me like what you said. The resultant files are appended in the zip file for ready reference.
How about cleaning the power supply? it can also bring in Nonsense. better use a choke of say 1mH and definitely have a 0.1 ML C capacitor across the Vdd and Vss pins and very close to the chip....
you may try PCB123. I use it.
Perhaps it is easy as 1,2,3....
see at www.pcb123.com
Thanks Fratello !!
Can you upload the .bas file that you have used please !!
No Ideeea...
generally you find 32.768KHz crystal. One can be salvaged from any faulty or broken wrist watch. as regards silicon oscillator, you can well make an oscillator with simple chips like...
as long as a working project of elektor is modded by adding another sensor, it should work for a single sensor also. I have just disabled all lines pertaining to sensor2.
I am asking for practical...
@Fratello,
is your latest software working in the range 0 to 100 deg Celsius at least?
When I tried for that and with one sensor, it shows -0.06 Celsius. and the sensor would not respond for...
But DS18B20 is capable of giving a better resolution??
there are some errors like missing subroutines !!
Error[113] E:\KVRAJASEKHAR.ASM 42 : Symbol not previously defined (delay_0.5s)
Error[113] E:\KVRAJASEKHAR.ASM 49 : Symbol not previously...
list= p16F628A
#include <p16F628A>
__CONFIG 03F2A ;this would set to what you wanted
in MPLAB click configure , select device and set it for 16F628A
close and reopen the...
Did you build this mcuhobby version, and then found it to be the best?
In our country the pre-sensitized ones are not sold, and lamination type film rolls, i saw with production houses, but outside it is a dream, as it is to be imported in bulk roll
As such we resort...