Thanks. That makes perfect sense when phrased that way.
Type: Posts; User: enauman; Keyword(s):
Thanks. That makes perfect sense when phrased that way.
In the PBP3 manual description of the shiftout command, it says "The bits shifted out are always the low order bits, regardless of the mode used, LSB or MSB". What does this mean?
If I do not use...
Thanks. It worked.
Can anyone out there tell me if swapping the a and b signals will reverse the count direction? I have a unidirectional system. It just happens to be going in the reverse direction as far as the...
Thanks for the explanation Darrel. Exactly what I was looking for.
Maybe it should be called out in the command description. It's a trivial point. I was just curious.
Yes. The example is where I got the idea to use variables instead of constants. But my question is WHY can't constants be used.
I have a problem I can't seem to figure out involving the DIV32 command. I am filling an array with 11 successive time measurements. I need to divide a large constant by each member of the array...
Hi Charlie,
I have a couple of questions for you. What type of encoder are you using? Are you planning on making the advance dynamic or static? Didi you do your coding in PIC basic or assembly?...
Look at the data sheet for the A/D converter. I assume you are making analog measurements. Most PICs A/D can sample around 50uS.
I'm curious if this project ever came to fruition. I'm currently designing an ignition system for a vintage triumph engine for Bonneville Salt Flats. I started out using an AVAGO encoder because it...
Oh yeah, I was using a PIC16F1824 at 32 MHz.
I'm curious if this project ever came to fruition. I'm currently designing an ignition system for a vintage triumph engine for Bonneville Salt Flats. I started out using an AVAGO encoder because it...
I know this is an old post but I made a tach adapter using a PIC 16F1824. It basiclly takes a single cylinder engine signal (1 pulse /720 degrees) and multiplies it by 4 to use a 4 cylinder tach. ...
The HPWM command reference says "Many devices allow selection of Timer resourcefor some or all of the PWM channels. The HPWM command will automatically determine the preset Timer selection upon...
When I try to run the calculator, I get a 'runtime error 7' out of memory
Sure. It can only be used on plastic as it's not heat treated. If you give me your email address I can send you some pictures and a description.
I made a DE9 connector punch on my CNC mill that works great on plastic. It is similar to the greenlee punch but designed for plastic. If anyone is interested, let me know.
What exactly is a conditional config/compilation?
Thanks for the suggestions. I was looking for information that apparently is not available to the public. I decided to bail and but a new machine. The old one was pretty old... :) I got an...
I've done all of that. The supplies are all within spec with the configured load applied. What I was curious to find out what the interface circuitry on the mother board is between the "power"...
My apologies Darrel, for spelling your name wrong.
Ed
No video. no beeps. Diagnostic led's as described.
I know this isn't a PC forum, but I'm at a loss and there are some pretty good minds on this forum. This is a PC hardware question for a Dell XPS400. I shut the pc down normally and unplugged it...
Thanks Dave. The project has been on hold for the last week. I got sidetracked (pleasantly) by a friend of mine at Freescale Semiconductor. I got their codewarrior development system in exchange...