LOL I'm still getting notifications on this thread...
The only programming of PICs I do these days it to flash firmware for 16F886's to repair faulty telescope control boards and save the members...
Type: Posts; User: Scampy; Keyword(s):
LOL I'm still getting notifications on this thread...
The only programming of PICs I do these days it to flash firmware for 16F886's to repair faulty telescope control boards and save the members...
LOL - I've not been on this forum for years, and today received notification of your post... How you doing ?
Like I said I've not been active on here for some years, and no longer program in PBP...
Hi Guys,
Not been over here for some time as I moved to the dark side of Arduino a few years back. So I've had a sort out, bundled some of the old 16 and 18F PICs together and added it to my...
Out of the blue I receive a notification to this thread, I totally forgot I had still set alerts to this board. Its a shame to see so many of the old members departing (by that I mean long serving...
It's strange how the Arduino platform gets lumped in with the raspberry pi and other single board computers, but the two are so far apart. Unlike the Pi and other single board computers, the arduino...
Glad it helped. My solutions may not be the most elegant, but it worked for me... and as all things in life there is always more than one solution :)
I respect your views, but whilst watching this video the guy did a "whats inside" to discover that the product is based around a Pi
https://youtu.be/UtNGVb94TFE
Companies website ...
I tend to convert the time from the RTC chip into two variables such as timeH and timeM for hours and minutes
I2CRead...
Thanks for the suggestions. I ended up swapping the SSR for another and the unit is working as it should.
All loads for channels 1 -3 are the same (100w), with channel 4 being 150w, so not...
Guys, I'm building a thermostat project that uses G3MB-202P solid state relays, and have a strange issue with one of these outputs.
Basically 5v comes from the micro (in this case its an arduino)...
Regarding the comments about having a full featured single board computer to blink LEDs, but that I'm sorry to say is what people want these days. The days where programming a PIC and then using...
I tried Amtel Studio 7 which is a very good alternative to the basic Arduino IDE, and offers a lot of extra tools.
As I've mentioned elsewhere, I too made the switch because you can get up and...
To a degree yes. The ATMEGA 2560 is an 8 bit micro running at 16mhz, with 256 KB of program space, but its in a 100 pin TQFP package which makes programming and soldering to a custom hobby PCB more...
You can pick up an Arduino Mega2560 board for around £10, and you can also pick up just the chip (probably for around the same amount) but the package if the chip does not make it practical to...
For me I tend to lurk around this forum less frequent than I used to. I've not used my EasyPIC5 board to program PICs via PB Pro for a few years now. The last project I worked on (hobby project)...
https://cdn-shop.adafruit.com/datasheets/TCS34725.pdf
If you told the forum what application you want to use this for it might help.... In the mean time the datasheet is listed above
I also found that they get arsy if you give them too much. I didn't get much joy from the three arduino forums I posted on when porting my thermostat code to the platform. They also don't provide...
Try setting a variable.
character var word
then use something like
Strange baudrate !
Using a EUSART calculator for your baudrate it gives these values for the port settings
DEFINE HSER_RCSTA 90h ' Enable serial port & continuous receive
DEFINE HSER_TXSTA...
I would get the two talking directly without any MIDI interface. Just connect the TX from the PIC running the transmission code, to the RX on the receiving PIC using a simple jumper wire. If you...
The one thing that struck me when I got into programming PICs with PBP was the warm friendly welcome I received on this forum, and regardless of what I was seeking assistance on always received the...
I have to agree. I dare say most things like TFT screens, Ethernet etc that doesn't have native commands in PBP could be used could work with the aid of asm code etc, but then IMO that then defeats...
I thought it was a forum for PicBASIC pro :) :)
Hi Richard,
No I didn't upgrade at the time due to the cost and personal circumstances. Maybe it's something that I should look at, but then you have already stated that you are porting your...
I just wanted to share an experience with you guys that is somewhat related to this project.
I've had a 2.8" SPI serial TFT screen sitting in my electronics draw for sometime, and as there is...