in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
Type: Posts; User: richard; Keyword(s):
in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
just tried the "fussy" outer shell option on my ender5+, i like it and it hardly slows a print at all . i never knew it was there until now
thanks for that, its a nice way to disguise the layers. i...
the motherboards are just arduino mega2650 dressed up a bit with a nice cnc coat on, you can recover them using another arduino as a icsp programmer.
i used my old mboard as a grbl core xy laser...
my ender5 plus did that a couple of times. i think i have it sorted.
make sure the thermistor is secure in its hole, don't over tighten the holding screw and cut through the insulation and do fill...
that won't help at all, you need to ensure that the config is correct and that osccon reg is set appropriately
define OSC just tells compiler what freq you think you are running at, it does...
I just tape the back side and fill the hole [if you use the thick stuff you can get a nice dome if your quick], shine led for a few seconds and ..
volar instant clear led bezel.
easiest if light...
clear UV set resin is great for making small transparent windows in housings, laser cut acrylic sheet can make light pipes [best used edge on], you lose a bit of brightness though
how have you set FOSC for the pic.
there is no OSCCON REGISTER setting in your code , the CONFIG settings are not shown, unless you have a 4mz Xtal setup
how sure are you that FOSC is the 4mhz you...
the data sheet address $36 is a 7 bit address pbp uses an 8 bit address scheme
You may well have to "configure" the device but for an i2c read transaction that is an unnecessary step
...
the data sheet address is a 7 bit address pbp uses 8 bit address
what are ic2writes for ?
they seem to be of no value that i can see
you defined sda and scl why not use them ?
more like
...
i find super glue won't last on "common garden variety" pla. there are quite a few pla variants around now, silky smooth , pla+ , pla super strong
that i have not tried gluing up. glue may not...
are you printing in pla ?
if so what glue are you using , the only glue i find that works well is that nasty solvent based scigrip 16 [dimethylene chloride ?]
once you crack the seal it quickly...
a portrait version
9645
'*******************************************************************
'* Name : SSD1306p.pbpmod *
'* Author :...
in theory portrait mode should be easier and faster than what i have now, the screen width 64 height 128
and the buffer sent to the screen in horiz fill mode nice and sequentially [ might need bit...
this works perfectly for me, i doubt you implemented it exactly as posted
i notice you don't set the pins used to digital mode
another correct way
' PIC 16F18426
#CONFIG
__config...
bmp placement fixed , note that horiz placement is byte aligned ie for a 128 bit wide display there are 16 bytes therefore 16 positions max
i have had a look at how those programs [lcdassist and glcd tool] manage the remainder bits when a bitmap is not an 8bit multiple in width
and it defeats me , i cannot get how the "stray" bits of...
the bmp image width needs to be a multiple of 8 by the look of it
post the original bmp image if you want me to look further into it
i cant find the gltools on the web any more
i did find my install version in my downloads folder
at your own risk
bmp bug fix
there was another bug in the include, the bpm height var was reading in the first byte of the image as its high.byte
when there was not meant to be a high.byte
and i did accidentally leave the...
glcd tools also works well in generating bmp's
and formats the data nicely
9629
ah! the bmps are in a different format the byte are now laid out horizontally
i also discovered the dmp code upsets the font height [did have a shared variable]
i used lcdassistant to generate...
there is no need to modify the include
the correct usage is
DMDBMP 0,0,logo64
bmp's need a header to set width and height
post what you have tried and i will have a look