Search:

exactly that's it; I did not find any topic as a guide, therefore I assume it is complex.
regards

ING:
Good morning and thanks for responding ... In the midst of this crisis, your recommendation is complex. We specifically need to add that sensor to our project.

ESP:
Buen día y gracias por...

ING:
Some example of how to use the MAX30100 in PBP?
Any example of how to use the MAX30100 in PBP?
I am collaborating with a maker group that works on the COVID-19 issue, and we are needing to...

Hello friend, look, this is the simple program I made to see how the library and good works, the result is the above comment
8081
compile with PBP probe with MPLAB and I get the same results

Veamos si le gusta.... su voltimetro con un graficador de señal (no es un osciloscopio)

Let's see if you like .... your voltmeter with a graphing signal (not a oscilloscope)

8077

no esta...

Hello Friend; tried everything ... including this one you described me as I had noticed that too in the library ...
if I put in the program:

menu:
PrintStr 0.1, "Hi!"
PrintStr 0.2, "HELLO!"
...

respecto a la visualizacion de los caracteres, eso seria asi:


LcdReg = %10100000 + 17 ' cursor X
call PrintCtrlLcd
LcdReg = %01000010 +40 ...

Hola, antes que nada, gracias por el ejemplo, ya que se puede usar como base y o libreria para otros proyectos... Anoche me puse largo y tendido entender el programa y ver el error...
Tengo en mente...

me interesa esta libreria, por que parece mucho mas practico y sencillo escribir y colocar el valor de variables ;)
Google Translate:
I'm interested in this library, that seems much more practical...

Hola, consegui un par de modulos 3310 y estoy haciendo algunas pruebas; arranque en proteus y al compilar el ejemplo del foro, me sale este problema:
Google Translate:
Hello, I got a couple of...

I returned with news.
Well, we can say that there were many things which would not let me make the project.
On one hand, I had problems with the port of my PC, it crashes when more than one program...

You're right; Tonight I will go to the board and I do physical tests ... take them it with serine and serout and once it achieves communication, shall pass to HSERIN / OUT ... I did not find any...

Hello friend; It was first tested in a virtual version (Proteus + + Xscada Virtual Serial Port Driver).
Xscaa brings a tool to read the data packet that enters and exits the ports ... you can write...

I struck me ... I'm locked ... I get angry that I can not take this issue forward ... I turned round and round and do not understand where is the error ... Copy and paste them as examples to work and...

:D ready .... one less problem ... I haven´t configured in the hyperterminal as reversed polarity
now continue with the rest to see and understand that the package is not interpreted7355

Well! I found a problem and already almost solved ... this port is blocked, so use a virtual port for nesting

7352

but now I see communication by the hyper terminal, note that there is a speed...

hi thanks for replying ....



changing those lines and did not work ... adding the probe in the "" W because that indicates if write or read and not have problems ... both to receive and send...

I'm playing with and I XSCADA problem arose when finished ... program it does not work ... Usually use software-controlled communication, but in this case, as I wanted to meet other microcontroller...

Comunicacion serial "PIC - Modem GSM ENFORA".
Dentro de la gran variedad de modem GSM / GPRS que hay en el mercado, el modem enfora a mi parecer es uno de los modem mas completo y rusticos que hay...

7334

Hello, last night very nearly completely finished my hardware to read 4-20mA (24VDC) and generate a PWM 4-20mA (24VDC) ... Everything runs based on two LM358 with single source (one is...

I leave a part of the program ... basically is the operating principle of the mirror (input voltage for the analog port = output voltage filter pwm)

En español:
les dejo una parte del programa......

well, succeed in making a mirror with the help of the LM358.
Basically, what I do is with the first Ampop (12v source) is to convert the 4-20mA 0-5V input voltage ... that, I do mirror the output of...

thanks for the help; this is my project hardware (monitor voltage and current output proportional). The idea is to add the 0-5VDC output with pwm controlled to perform a transducer 0-5V / 0-10V /...

Hello, I have a doubt that while I can not solve ...
As I can do to reflect a pwm and a filter (resistor 1k and capacitor 1uf on the output pin of the pwm), I read the voltage with analog port ... ...

Flfl m Sorry, I do not want to contradict your idea, but in my opinion, aside these simple solutions to control inductive loads triac; And you pose, if not understood why my English is half bad, not...